CLAUSING SUP8BVSCNCFG CNC Bed Mill offers precision with a 16.75" x 62" table and 3-axis control. Powered by a 7.5 HP motor, it boasts a spindle speed up to 5,160 RPM. Enhanced by Fagor 8055i Control and robust Meehanite castings for optimal performance.
| Table-W | 16.75" | 425.45 mm |
| Table-L | 62" | 1,574.8 mm |
| # Axis | 3 | 3 |
| Travel-Long | 41.34" | 1,050 mm |
| Travel-Cross | 22.83" | 579.88 mm |
| Power | 7.5 hp | 5.6 kW |
| RPM | 5,160 RPM | 5,160 RPM |
| Taper | NMTB 40 | NMTB 40 |
| Control | CNC (FAGOR 8055I) | CNC (FAGOR 8055I) |
| Dimensions | 98.03" x 80.71" x 84.65" | 98.03" x 80.71" x 84.65" |
| Weight | 7,200Lbs | 7,200Lbs |
Machine Style..........CNC Super Bed Mill
Spindle Speed Control..........Electronic Variable Speed
Number of Controlled Axes..........3 (X, Y, Z-Column)
Manual Quill Scale W-Axis..........Yes (synchronized)
Spindle Motor Horsepower..........7.5
Table Size (inch)..........16.75 x 62
Table Load Capacity (lbs.)..........2,000
T-Slot Width (in)..........(.709)
T-Slot Center Distance (inch)..........3.15
Number T-Slots..........3
Table Way Design..........Dovetail
Cross Feed Way Design..........Square
Column Way Design..........Square
X – Longitudinal Travel Manual (inch)..........41.34
Y – Cross Travel Manual (inch)..........22.83
Z – Column Travel Manual (inch)..........23.62
W – Quill Travel (inch)..........6
Programmed Feed Rate X,Y (in/min)..........0-100
Rapid Feed X,Y (in/min)..........100
Programmed Feed Rate Z (in/min)..........0-75
Rapid Feed Z (in/min)..........75
Head Tilt Left or Right..........90°
Variable Spindle Speed (rpm)..........65 – 5160
Variable Spindle Speed Low Range (rpm)..........65 – 590
Variable Spindle Speed High Range (rpm)..........575 – 5160
Spindle Taper..........NMTB 40
Quill Feed (in/rev)..........(.0016/.003/.006)
Quill Diameter (inch)..........4.13
Length of Saddle on Bed (inch)..........53.15
Width Across Bed Ways (inch)..........22.83
Spindle Nose to Table (inch)..........3.93 – 27.55
Center of Spindle to Column Ways (inch)..........23.62
Floor to Table Surface (inch)..........34.3
Table to Column Ways (inch)..........0.79 – 23.62
Voltage Required..........230 or 460 (w/transformer)
Phase..........3
Machine Weight (lbs.)..........7,200
Machine Foot Print (WxDxH) (inch)..........98.03 x 80.71 x 84.65
Shipping Weight (lbs.)..........8,000
Machine Features:
Fagor 8055i Control
C7 double nut X,Y,Z axes 1.26” diameter ballscrew
Linear position feedback X,Y, Z-Column, Manual W-Quill
Powerful 7.5 Hp main spindle drive motor
Electronic inverter variable spindle speed with 2 ranges and 2 mechanical shift ranges
Hardened and ground spindle with NMTB/NT 40 spindle taper
Hardened and chromed quill with 6” travel
CP4 ABEC7 angular contact spindle bearings
Hardened and ground table surface with ground t-slots for reference edges
Hardened and ground dovetail ways X axis, hardened and ground square ways Y and Z axis
“ Turcite B” coating on saddle X,Y axes ways
Meehanite castings for superior rigidity and wear resistance
Stainless steel front Y axis way cover, rubber Y axis rear and Z axis
Automatic lubrication with alarm
Halogen worklight
Coolant system with pump
A one year warranty backed by Clausing Service Center dedicated to support our customers with parts and service
