NEW CLAUSING SUP6BVSCNCFG

Specifications:
• Machine Style..........CNC Super Bed Mill
• Number of Controlled Axes..........3 (X, Y, Z-Column)
• Manual Quill Scale W-Axis..........Yes (synchronized)
• Spindle Speed Control..........Electronic Variable Speed
• Spindle Motor Horsepower..........5
• Table Size (inch)..........15 x 60
• Table Load Capacity (lbs.)..........1,800
• T-Slot Width (in)..........(.709)
• T-Slot Center Distance (inch)..........3.15
• Number T-Slots..........3
• Table Way Design..........Dovetail
• Cross Feed Way Design..........Square
• Column Way Design..........Square
• X – Longitudinal Travel Manual (inch)..........41.34
• Y – Cross Travel Manual (inch)..........19.69
• Z – Column Travel Manual (inch)..........23.62
• W – Quill Travel (inch)..........5
• Programmed Feed Rate X,Y (in/min)..........0-100
• Rapid Feed X,Y (in/min)..........100
• Programmed Feed Rate Z (in/min)..........0-75
• Rapid Feed Z (in/min)..........75
• Head Tilt Left or Right..........90°
• Variable Spindle Speed (rpm)..........65 – 5160
• Variable Spindle Speed Low Range (rpm)..........65 – 590
• Variable Spindle Speed High Range (rpm)..........575 – 5160
• Spindle Taper..........NMTB 40
• Quill Feed (in/rev)..........(.0016/.003/.006)
• Quill Diameter (inch)..........4.13
• Length of Saddle on Bed (inch)..........47.24
• Width Across Bed Ways (inch)..........20.47
• Spindle Nose to Table (inch)..........3.93 – 27.55
• Center of Spindle to Column Ways (inch)..........20.47
• Floor to Table Surface (inch)..........37
• Table to Column Ways (inch)..........2.05 – 21.73
• Voltage Required..........230 or 460 (w/transformer)
• Phase..........3
• Machine Weight (lbs.)..........6,600
• Machine Foot Print (WxDxH) (inch)..........92.91 x 76.77 x 85.43
• Shipping Weight (lbs.)..........7,400

Machine Features:
• Fagor 8055i Control
• C7 double nut X,Y,Z axes 1.26” diameter ballscrew
• Linear position feedback X,Y, Z-Column, Manual W-Quill
• Powerful 5 Hp main spindle drive motor
• Electronic inverter variable spindle speed with 2 ranges and 2 mechanical shift ranges
• Hardened and ground spindle with NMTB/NT 40 spindle taper
• Hardened and chromed quill with 5” travel
• CP4 ABEC7 angular contact spindle bearings
• Hardened and ground table surface with ground t-slots for reference edges
• Hardened and ground dovetail ways X axis, hardened and ground square ways Y and Z axis
• “ Turcite B” coating on saddle X,Y axes ways
• Meehanite castings for superior rigidity and wear resistance
• Stainless steel front Y axis way cover, rubber Y axis rear and Z axis
• Automatic lubrication with alarm
• Halogen worklight
• Coolant system with pump
• A one year warranty backed by Clausing Service Center dedicated to support our customers with parts and service