AI search could not be completed. Please try again or adjust your search.
900 Ton, housing type, upstroke, 64" x 64" hot plates, #B4031
| Tonnage | 900 T | 816.467 t |
| Heating Element | Electric | Electric |
| # of Openings | 1 | 1 |
| Design | Straight Side | Straight Side |
| Up or Downstroke? | Upstroke | Upstroke |
| Heated Platen (L-R) | 64" | 1,625.6 mm |
| Heated Platen (F-B) | 64" | 1,625.6 mm |
| Bed (L-R) | 64 in | |
| Bed (F-B) | 64 in | |
| Stroke | 8.5" | 215.9 mm |
| Daylight | 14.5" | 368.3 mm |
USED 900 TON HYDRAULIC MOLDING & LAMINATING PRESS
Housing type; upstroke type
Platen area (nominal): 64" L-R x 64" F-B
Stroke of hydraulic platen: Approx. 8.5" maximum
Daylight opening (total): Approx. 14.5" maximum
Daylight opening between
hot plates (1): 10.5" maximum; (2) 4.25" maximum
Hot plates (2): 64" L-R x 64" F-B (electrically heated)
Plate (1): 64" L-R x 64" F-B (no heaters)
(9) main rams
Power unit: Hydraulic pump, driven by
10 HP 1725 RPM 230/460/3/60 motor
Speeds: Approximately 20"/minute closing
Approximately 20"/minute return
Controls: (6) digital temperature controllers
Serial no. N/A
Stock no. B4031
ON LOCATION, NORTH CAROLINA
(SPECIFICATIONS SUBJECT TO VERIFICATION)
