SCM, DMC SD90, 53" Wide Belt Sanders
Overview
Installation - $4,500
Maximum performance for companies increasing production. Designed for the medium to high industrial companies that require diversified machining, dmc sd 90 satisfies all calibrating and sanding requirements, by offering a wide range of technological solutions allowing the possibility of customising the machines compositions. The availability of offering many types of operating units such as planing units, roller units (with 175, 220, 250 and 320mm diameters), pad units and superfinishing units guarantees the very best results on solid wood, veneer, laquer and paint operations.
General Features
DMC SD 90 RRCS 135 SW & VN - THREE HEAD WIDE BELT SANDER
Base and working table
Steel structure with electric cabinet on the machine front
Sanding belts introduction from the machine left side
Powered adjustment of working thickness
Main motor positioned inside the base
Electrical equipment
Electromechanical keyboard positioned on the machine front side
Automatic star-delta start of the main motor
Overload protections on the motors
Motors in isolation class IP54
Emergency and safety devices
Automatic brake for rapid shutdown of the operating group
Hand-safety emergency device in the infeed panel area
Front and rear emergency pushbutton
Padlockable main switch
Automatic emergency stop machine for:
- Sanding belt breaking
- Not-tensioned sanding belt
- Lateral outplacement of sanding belt
- Absence of compressed air
- Overload on main motor
Basic machine standard equipment
Electronic ammeter on main motor for readout of absorbed power
Electronic readout of working thickness
Electronic oscillating of sanding belts
Rubber-coated pressure rollers
Infeed anti-kickback vertically pivoted roller on 1st operating group
Infeed/outfeed work pieces support rollers with two rollers
Automatic device for feed belt tracking and tensioning
Machine control features
Control of 3 main operating groups
Control of one brushing unit and one outfeed blower unit
Control of vacuum table
Control of on/off positioning and timed intervention of the pad or roller groups
Control of two inverters (on your choice: on the two main operating groups or one inverter on the operating group and one inverter on the feed belt)
Working thickness control
Abrasive belt speed control
Reverse rotation control of one abrasive belt
Sequential automatic start-up of main motors
Blowers timing control for belts cleaning and for rotating blowers of outfeed panel cleaning
Machine control in manual or semiautomatic mode or with 4 working programs selectable or rapidly actable by means of function pushbuttons
Graphic visualization of machine configuration on front
Machine report (working and stand-by hours)
Machine damage alarms control
DMC SD 90 RRCS 135 - 53" WIDE BELT SANDER - ONE STEEL DRUM ROLLER, ONE RUBBER DRUM ROLLER, ONE COMBINATION HEAD
DMC SD 90 RRT 135 - 53" WIDE BELT SANDER - ONE STEEL DRUM ROLLER, ONE RUBBER DRUM ROLLER, ONE SUPERFINISHER ORIBITAL PAD
DMC SD 90 RCST 135 - 53" WIDE BELT SANDER - ONE STEEL DRUM ROLLER, ONE COMBINATION HEAD, ONE SUPERFINISHER ORIBITAL PAD
DMC SD 90 KRCS 135 - 53" WIDE BELT SANDER - PLANER, ONE RUBBER DRUM ROLLER, ONE COMBINATION HEAD
Specs
DMC sd 90 RRCS 135 SW, 53" Sander, Steel drum, Rubber drum, Combi head with Elastic Pad, eye-S
Variant SKU: WSI-SCMSD90RRCS135SW
Technical Specifications
Dimensions
Model: DMC SD 90 RCS 135 SW & VN DMC SD 90 RCST 135 VN
Working Width: 1,350mm (53”) 1,350mm (53”)
Number of Heads Available: 2 3
Feed Motor: 3 HP with inverter 3 HP with inverter
Feed Speed: 12 to 60 fpm 12 to 60 fpm
Maximum Work piece Thickness: 170mm (6.69”) 170mm (6.69”)
Minimum Work piece Length: 12.5 inches 12.5 inches
Abrasive Belt Size: 53” x 103” 53” x 103”
Compressed Air Requirements: 6 Bar (88 PSI) 6 Bar (88 PSI)
Dust Outlets: 2 outlets @ 195mm (7.75”) 2 outlets @ 195mm (7.75”)
Exhaust Requirements: 3,544 CFM 3,744 CFM
Power Requirements: 130 amps @ 230 Volts/3 phase 137 amps @ 230 Volts/3 phase
[SCM DMC SD 90 RCS 135 SW & VN]
[Overall Dimensions]
Height of fixed table: 2260 – 2460mm
Height of mobile table: 2264mm
Width: 1899mm
Length: 2580mm
Explore More New Equipment Listings on Equipt
Browse related New Calibrating Sanding Machines, Sanders, Joinery, Assembly, and Shaping, and Woodworking equipment, including SCM machines for sale on Equipt.
New Equipment for Sale in Illinois, United States
Find New Calibrating Sanding Machines, Sanders, Joinery, Assembly, and Shaping, and SCM equipment for sale in Illinois, United States, with related local Woodworking searches.
New Equipment for Sale in United States
Browse New Calibrating Sanding Machines, Sanders, Joinery, Assembly, and Shaping, and SCM equipment for sale across United States, including related Woodworking inventory paths.
Sell Your Used Equipment
Find dedicated pages to sell used Calibrating Sanding Machines, Sanders, Joinery, Assembly, and Shaping, Woodworking, and SCM equipment on Equipt.

