Your Cart
You don't have any items in your cart.
New | in-Stock

PROFILE & TOOL GRINDERS

Illinois, United States
2,860Listings|2Followers
Overview
Profile Grinders

2 – Infinitely variable speed grinding spindles
Grinder is set up to grind straight knives with flat face of wheel or grinding head system is rotated 90 degrees for profile grinding with the 2nd grinding head & wheel
With the release of a single lock, the G320PS-HSK converts to a complete profile grinder motorized head tilt
Straight knife is 3,000 – 6,000 RPM driven by a 1 HP motor
Profile grinding is 1,500 – 3,000 RPM driven by a 2 HP moto
Designed to accommodate your HSK 85 heads
Can grind your standard straight bore or hydrolock cutterhead knives with the use of the HSK adaptor
2 – Infinitely variable speed grinding spindles
Grinder is set up to grind straight knives with flat face of wheel or grinding head system is rotated 90 degrees for profile grinding with the 2nd grinding head & wheel
Powered head tilt
Linear action carriage with carriage locks
Adjustable arm rest
Diamond wheel dresser
Template slide with dial indicators
Multi-stylus turret complete with set of 6 assorted styli
Coolant system with pump-out facility and removal tank
Twin coolant pipes to profile wheel
Roughing wheel for profile grinding
Finishing wheel for profile grinding
B.N. wheel for straight knife grinding
Straight knife guide for straight knife grinding
1 length of template steel.
Heavy duty cutterhead arbor complete with set of locking collars and axial constant stop collar.
Operators manual, spot light and instruction manual.
Grinder shown above set up to grind straight knife heads

Specs

[Maximum length of cutterhead:]
Using locking collars: 12.6″ (320mm)
Hydro-loc block: 13.4″ (340mm)
Solid Profile: 9.6” (245mm)
[Maximum diameter of cutterhead:]
Profile grinding: 13 3/4″ (350mm)
Straight knife: 11.8″ (300mm)
Solid profile: 11.8″ (300mm)
[Grinding Wheel size for Profile grinding:]
Diameter: 9″ (230mm)
Width: 3 /16″ (5mm) other sizes available
Bore: 1-1/4″ (31.75mm) or 2.36” (60mm)
Type: Aluminum Oxide
[Grinding Wheel size for Straight Knife grinding:]
Diameter: 4″ (100mm)
Bore: .787” (20mm)
Type: Borazon or Diamond
[Grinding wheel size for solid profile grinding:]
Diameter: 6″ (150mm), 7″ (175mm), 8″ (200mm)
Bore: 20mm
Type: C.B.N.
Throat depth: 2.16″ (55mm)
[Spindle speeds (variable)]
Profile grinding spindle: 1500-3000 rpm
Straight knife grinding: 3000-6000 rpm
[Motor HP’s:]
Profile grinding spindle: 2 HP (1.5kw)
Straight knife spindle: 1 HP (.75kw)
Powered tilt motor: 0.03 HP (0.025kw)
Coolant pump motor: 0.18 HP (0.188kw)
Coolant tank capacity: 8 gals (36L)
[Electrics to CSA/UL Standards complete with 230/460 or 575/3/60 electrics]

Loading...
Loading...
Loading...