25/36.25" X 120" KINGSTON HEAVY-DUTY GAP-TYPE ENGINE LATHE W/TAPER ATTACHMENT
SERIAL NO. S03680418, MODEL HR3000
| Swing | 25" | 635 mm |
| Centers | 120" | 3,048 mm |
| Spindle Bore | 4.06" | 103.12 mm |
| Power | 20 hp | 14.9 kW |
| RPM | 1,200 RPM | 1,200 RPM |
| Swing Over Cross Slide | 16.5" | 419.1 mm |
| Weight | 11600 | 11600 |
25/36.25" X 120" KINGSTON HEAVY-DUTY GAP-TYPE ENGINE LATHE W/TAPER ATTACHMENT
SERIAL NO. S03680418, MODEL HR3000
EQUIPPED WITH:
TAPER ATTACHMENT
4-1/16" HOLE THRU SPINDLE
INCH-METRIC THREADING CAPABILITIES
THREADING DIAL - POWER RAPID TRAVERSE (4-WAY)
21" 4-JAW CHUCK W/JAWS - HARDENED & GROUND BED WAYS
D1-11 CAMLOCK SPINDLE NOSE
CATALOG SPECIFICATIONS:
Hole Thru Spindle 4.06"
Swing Over Bed Ways, Rated 25"
Swing thru Gap 36.25"
Swing Over Cross-Slide 16.5"
Distance Between Centers 120"
Cross-Slide Cross-Feed Travel 21.2"
Compound Rest Travel 9.8"
Tailstock, Spindle Diameter 3.93"
Tailstock, Spindle Travel 11.75"
Tailstock, Spindle Taper #6 MT
(16) Spindle Speeds, Range 12 to 1200 RPM
Thread Changes, Range 2 to 28 TPI
Metric Thread Changes, Range 1 to 14 MM
Motor Horsepower 20 HP
Electrical System 220-440/3/60
Weight Approximately 11600 LBS
PRICE: F.O.B. OUR WAREHOUSE
Hole thru spindle: 4.06"
Swing over bed ways, rated: 25"
Swing thru gap: 36.25"
Swing over cross-slide: 16.5"
Distance between centers: 120"
Cross-slide cross-feed travel: 21.2"
Compound rest travel: 9.8"
Tailstock, spindle diameter: 3.93"
Tailstock, spindle travel: 11.75"
Tailstock, spindle taper: #6 MT
(16) spindle speeds, range: 12 TO 1200 RPM
Thread changes, range: 2 TO 28 TPI
Metric thread changes, range: 1 TO 14 MM
Motor horsepower: 20 HP
Electrical system: 220-440/3/60
Weight approximately: 11600 LBS
