USED BOYAR-SHULTZ 2A818

8" X 18" BOYAR-SCHULTZ "HUSK-E-LINE" AUTOMATIC HYDRAULIC HORIZONTAL-SPINDLE SURFACE GRINDER
MODEL 2A818, SERIES "HUSK-E-LINE"

EQUIPPED WITH:
8" X 18" WALKER ELECTRO-MAGNETIC CHUCK W/CONTROLS
POWER SPINDLE ELEVATION
COOLANT PUMP

CATALOGUE SPECIFICATIONS:
Table Working Surface, W x L 8" x 18"
Grinding Width Capacity, Maximum 8"
Grinding Length Capacity, Maximum 18"
Height Under 7" Grinding Wheel To Table 13.5"
Table Longitudinal Travel 21"
Table Cross Travel 9.25"
Table Longitudinal Feeds, Range 0 to 70 FPM
Table Crossfeeds, Range 0 to 3/8 IPR
Grinding Wheel Diameter, Standard 7"
Grinding Wheel Width, Standard 0.625"
Grinding Wheel Hole Diameter 3"
Downfeed Handwheel Graduations .00001"
Crossfeed Handwheel Graduations .001"
Grinding Wheel Spindle Motor 1 HP/3450 RPM
Electrical System 208-220-440/3/60
Floor Space Required, W x D 6' x 4'2"
Weight, Approximately 2300 LBS

NOTE: THE HANDLE FOR THE MANUAL TABLE MOVEMENT LEFT TO RIGHT MAY REQUIRE A PIN OR KEY.
HYDRAULIC MOVEMENT WORKS FINE.

PRICE: F.O.B. OUR WAREHOUSE
Table working surface, w x l: 8" X 18"
Grinding width capacity, maximum: 8"
Grinding length capacity, maximum: 18"
Height under 7" grinding wheel to table: 13.5"
Table longitudinal travel: 21"
Table cross travel: 9.25"
Table longitudinal feeds, range: 0 TO 70 FPM
Table crossfeeds, range: 0 TO 3/8 IPR
Grinding wheel diameter, standard: 7"
Grinding wheel width, standard: 0.625"
Grinding wheel hole diameter: 3"
Downfeed handwheel graduations: .00001"
Crossfeed handwheel graduations: .001"
Grinding wheel spindle motor: 1 HP/3450 RPM
Electrical system: 208-220-440/3/60
Floor space required, w x d: 6' X 4'2"
Weight, approximately: 2300 LBS