Your Cart
You don't have any items in your cart.
Used

USED HARSLE 40X2500MM

China

Safety note

Buying from non-Pro sellers
Non-Pro sellers can be individuals or smaller businesses. Equipt does not verify every seller or inspect every item. Confirm who you're dealing with, ask for recent photos or video, and only pay through secure, traceable methods.

This seller is not an Equipt Pro dealer. Equipt does not inspect items, handle payment or guarantee transactions. Verify the seller and equipment before sending funds.

7,940Listings|17Followers
Overview
Plate Bending Rolls including Pinch

This used Harsle four-roll plate rolling machine, sold as 40x2500mm, is available from VIGERT. It is a hydraulic four-roller bending machine that pre-bends plate ends and rolls plate into cylinders, cones and other round shapes.
Its 40x2500mm designation indicates 40 mm and 2,500 mm. It can roll cones up to a 30-degree angle and works with NC and CNC control systems.
Key Features
Pre-bends the plate end with the clamping point right at the plate edge, leaving very little straight edge
Rear roll acts as a stop to square the plate parallel to the rolls, so it can be aligned in a single operation
Plate is clamped between the upper and lower rolls during rolling, reducing the risk of slipping
Side rolls tilt to set the cone angle, and the lower centre roll can also tilt, clamp and drive the plate
Can bend the trailing edge as well as the leading edge of the plate
Suited to NC and CNC control of the bending process
Applications
Rolling plate into cylinders and pipes
Forming cones and tapered sections
Pre-bending plate ends before rolling
General plate fabrication
Commercial Details
Make: Harsle
Model: 40x2500mm
Condition: Used
Location: Nanjing, Jiangsu, China
Seller: VIGERT
Frequently Asked Questions
What can this machine roll? It rolls plate into cylinders, cones and other round shapes, and can pre-bend the plate ends.
What is the maximum cone angle? It can roll cones up to a 30-degree angle.
Can it be used with CNC control? Yes, four-roll machines of this kind suit NC and CNC control of the bending process.
What should I ask when enquiring? Ask for photos or video of the machine under power, the control system and electrics, the rolls' condition, any tooling or accessories included, and loading and shipping arrangements.

Specs

Technical Specifications
Model: 40x2500mm
Type: Hydraulic four-roll plate rolling machine
Maximum cone angle: 30 degrees

Loading...
Loading...
Loading...