USED HARSLE 25×2500
Overview
This used HARSLE 25×2500 roll bending machine is available from VIGERT. It is a three-roller machine that bends sheet and plate into round cylinders, and its 25×2500 designation indicates 25 mm and 2,500 mm.
The two lower rollers are driven by the main motor through a main reducer and gear set, while the upper roller is raised and lowered by an auxiliary motor. All three rollers are forged from 45 steel.
Key Features
Main motor drives the two lower rollers through a reducer and gear wheels; roller direction is switched at the main motor
Upper roller is raised and lowered by an auxiliary motor and reducer, using worm and worm wheel drive with ball-bearing screws
Tilting bearing seat allows the finished cylinder to be removed from one end of the upper roller
Upper roller is held at standard height by a balance pull rod during offloading
Welded support frame and welded lower pallet
Ball-bearing screw and worm gear are forged from 45 steel
Electrical components from established brands
Applications
Rolling sheet and plate into cylinders
Pipes, tubes and tanks
Pressure vessel shells
General metal fabrication
Commercial Details
Make: HARSLE
Model: 25×2500
Condition: Used
Location: Nanjing, Jiangsu, China
Seller: VIGERT
Frequently Asked Questions
How is the upper roller adjusted? An auxiliary motor and reducer drive a worm and worm wheel that turn ball-bearing screws to raise and lower the upper roller.
How is a finished cylinder removed? The upper roller is raised and held with a balance pull rod, then the tilting bearing seat is opened so the cylinder slides off one end.
What are the rollers made of? The three rollers are forged 45 steel with a hardness of HRC35–45.
What should I ask when enquiring? Ask for photos or video of the machine running, the maximum thickness and width it rolls in your material, motor and electrical details, what accessories are included, and loading and shipping arrangements.
Specs
Technical Specifications
Model: 25×2500
Rollers: 3, forged 45 steel
Roller hardness: HRC35–45
Lower roller drive: Main motor via main reducer and gears
Upper roller adjustment: Auxiliary motor via auxiliary reducer, worm and ball-bearing screw
Explore More Used Equipment Listings on Equipt
Browse related Used Plate Bending Rolls including Pinch, Bending & Forming Equipment, Fabricating, and Metalworking equipment, including Harsle machines for sale on Equipt.
Used Equipment for Sale in Jiangsu, China
Find Used Plate Bending Rolls including Pinch, Bending & Forming Equipment, Fabricating, and Harsle equipment for sale in Jiangsu, China, with related local Metalworking searches.
Used Equipment for Sale in China
Browse Used Plate Bending Rolls including Pinch, Bending & Forming Equipment, Fabricating, and Harsle equipment for sale across China, including related Metalworking inventory paths.
Sell Your Used Equipment
Find dedicated pages to sell used Plate Bending Rolls including Pinch, Bending & Forming Equipment, Fabricating, Metalworking, and Harsle equipment on Equipt.

