USED HARSLE W11-25×2500
Overview
This used HARSLE W11-25×2500 hydraulic roll bending machine is available from VIGERT. It rolls plate into cylinders and curved sections using three forged rollers.
Its W11-25×2500 model designation indicates a 25 mm thickness and 2,500 mm width rating. The lower rollers are driven by the main motor through a reducer and gearing, and the upper roller is raised and lowered by a separate auxiliary motor.
Key Features
Main motor drives both lower rollers through the main reducer and a gear group, with roller direction reversed by the main motor
Upper roller elevation by an auxiliary motor and reducer driving worm gears and ball-bearing screws under the left and right roller bearings
Tilting bearing seat offloading device: the upper roller is raised and held with a balance pull rod, the pin shaft is drawn out and the seat tipped over so the rolled cylinder can slide off the end of the upper roller
Three 45 steel forged rollers with a hardness of HRC 35–45
Welded support frame and welded lower pallet, with the welded parts processed after welding
Ball-bearing screw and worm gear made from forged 45 steel
Electrical components from established brands
Applications
Rolling plate into cylinders and tubes
Fabricating tanks and pressure vessel shells
Forming curved sections for general steel fabrication
Commercial Details
Make: HARSLE
Model: W11-25×2500
Condition: Used
Location: Nanjing, Jiangsu, China
Seller: VIGERT
Frequently Asked Questions
How does the machine unload finished cylinders? The tilting bearing seat is opened after the upper roller is raised and secured, so the rolled cylinder can slide off the end of the upper roller.
How are the rollers driven and adjusted? The main motor drives the two lower rollers through a reducer and gears, while an auxiliary motor raises and lowers the upper roller through worm gears and ball-bearing screws.
What are the rollers made of? The three rollers are forged 45 steel with a hardness of HRC 35–45.
What should I ask when enquiring? Ask for photos or video of the machine under power, whether an inspection can be arranged, which accessories are included, the condition of the rollers, motors and electrics, and the loading and shipping arrangements.
Specs
Technical Specifications
Model: W11-25×2500
Number of rollers: 3
Roller material: 45 steel, forged
Roller hardness: HRC 35–45
Drive: Main motor and reducer to the lower rollers
Upper roller adjustment: Auxiliary motor with worm gear and ball-bearing screws
Explore More Used Equipment Listings on Equipt
Browse related Used Plate Bending Rolls including Pinch, Bending & Forming Equipment, Fabricating, and Metalworking equipment, including Harsle machines for sale on Equipt.
Used Equipment for Sale in Jiangsu, China
Find Used Plate Bending Rolls including Pinch, Bending & Forming Equipment, Fabricating, and Harsle equipment for sale in Jiangsu, China, with related local Metalworking searches.
Used Equipment for Sale in China
Browse Used Plate Bending Rolls including Pinch, Bending & Forming Equipment, Fabricating, and Harsle equipment for sale across China, including related Metalworking inventory paths.
Sell Your Used Equipment
Find dedicated pages to sell used Plate Bending Rolls including Pinch, Bending & Forming Equipment, Fabricating, Metalworking, and Harsle equipment on Equipt.

