Your Cart
You don't have any items in your cart.
Used

USED HARSLE QC12Y-8X5000

China

Safety note

Buying from non-Pro sellers
Non-Pro sellers can be individuals or smaller businesses. Equipt does not verify every seller or inspect every item. Confirm who you're dealing with, ask for recent photos or video, and only pay through secure, traceable methods.

This seller is not an Equipt Pro dealer. Equipt does not inspect items, handle payment or guarantee transactions. Verify the seller and equipment before sending funds.

7,940Listings|17Followers
Overview
Power Squaring Shears (Gauge)

This used Harsle QC12Y-8x5000 metal shearing machine is available from VIGERT. It is a guillotine shear for cutting sheet and plate metal to size.
Its 8x5000 designation indicates 8 mm thickness and 5,000 mm cutting length. The machine has a fully welded boxed-in bed table, a heavy-duty back gauge and a squaring arm on the left end of the table.
Key Features
Fully welded boxed-in bed table structure with high torsional stiffness to resist cutting forces
Frame design intended to hold blade clearance constant through the shearing cycle
Heavy-duty back gauge driven by precision ACME lead screws on roller bearings
Back gauge lifts mechanically at full rearward travel so longer pieces can be sheared
Main control console for on/off, back gauge position, stroke length and run mode
Squaring arm on the left end of the table, 4 ft long, with a steel rule marked in 1/16 in and 1 mm increments
Applications
Cutting sheet and plate to size for general metal fabrication
Squaring and trimming blanks before bending or forming
Preparing steel plate for structural and workshop components
Commercial Details
Make: Harsle
Model: QC12Y-8x5000
Condition: Used
Location: Nanjing, Jiangsu, China
Seller: VIGERT
Frequently Asked Questions
What does the 8x5000 in the model name mean? The QC12Y-8x5000 designation indicates a shear for 8 mm thickness with a 5,000 mm cutting length.
How is the back gauge driven? It uses precision ACME lead screws running on roller bearings, and it lifts mechanically at full rearward travel to allow longer pieces to be sheared.
What controls does the machine have? A main console lets the operator switch the machine on and off and set the back gauge, stroke length and run mode.
What should I ask when enquiring? Ask for photos or video of the machine cutting under power, the blade condition, the control and electrical details, which accessories are included, and the loading and shipping arrangements.

Specs

Technical Specifications
Model: QC12Y-8x5000
Machine type: Guillotine shearing machine
Squaring arm length: 4 ft
Squaring arm scale: 1/16 in and 1 mm increments
Back gauge drive: Precision ACME lead screws on roller bearings

Loading...
Loading...
Loading...