USED ACCURPRESS 6.35×3050
Overview
This used Accurpress 6.35×3050 guillotine shearing machine is available from VIGERT. It cuts sheet and plate metal in straight lines, and the 6.35×3050 designation indicates a 6.35 mm thickness and 3,050 mm cutting length.
It is an Accurshear-series shear built on a fully welded, boxed-in bed table intended to keep blade clearance constant through the cut. The series is rated for structural quality steel with typical properties up to 80,000 tensile and 44,000 yield strength, in the imperial units the builder quotes.
Key Features
Fully welded, boxed-in bed table with high torsional stiffness
Backgauge driven by precision ACME lead screws on roller bearings
Backgauge lifts mechanically at full rearward travel so longer pieces can be sheared
Manual blade gap adjustment by a hand lever on the side of the machine on 62506 to 650012 models
Single control console for power, backgauge position, stroke length and run mode
4 ft squaring arm on the left of the table, with a steel rule in 1/16 in and 1 mm increments
High carbon, high chrome or high carbon/shock resisting blades, depending on shear capacity
Applications
Cutting steel sheet and plate to size
Blanking for press brake and fabrication work
Structural quality steel cutting in general metalworking shops
Squaring and trimming sheet metal
Commercial Details
Make: Accurpress
Model: 6.35×3050
Condition: Used
Location: Nanjing, Jiangsu, China
Seller: VIGERT
Frequently Asked Questions
What does the 6.35×3050 designation mean? It indicates a 6.35 mm thickness and 3,050 mm cutting length.
How is the blade gap set? On 62506 to 650012 models it is set by a hand lever on the side of the machine.
How is the backgauge positioned? It runs on precision ACME lead screws and is set from the main control console.
What should I ask when enquiring? Ask for photos or video of the shear cutting under power, the blade condition, the electrics and control console, any included accessories, and loading and shipping arrangements.
Specs
Technical Specifications
Model designation: 6.35×3050
Series: Accurshear
Rated steel strength: Up to 80,000 tensile and 44,000 yield (typical)
Backgauge drive: ACME lead screws on roller bearings
Squaring arm: 4 ft, steel rule in 1/16 in and 1 mm
Explore More Used Equipment Listings on Equipt
Browse related Used Power Squaring Shears (Inch), Shearing Equipment, Fabricating, and Metalworking equipment, including ACCURPRESS machines for sale on Equipt.
Used Equipment for Sale in Jiangsu, China
Find Used Power Squaring Shears (Inch), Shearing Equipment, Fabricating, and ACCURPRESS equipment for sale in Jiangsu, China, with related local Metalworking searches.
Used Equipment for Sale in China
Browse Used Power Squaring Shears (Inch), Shearing Equipment, Fabricating, and ACCURPRESS equipment for sale across China, including related Metalworking inventory paths.
Sell Your Used Equipment
Find dedicated pages to sell used Power Squaring Shears (Inch), Shearing Equipment, Fabricating, Metalworking, and ACCURPRESS equipment on Equipt.

