Your Cart
You don't have any items in your cart.
Used

USED ACCURPRESS 6.35×2500

China

Safety note

Buying from non-Pro sellers
Non-Pro sellers can be individuals or smaller businesses. Equipt does not verify every seller or inspect every item. Confirm who you're dealing with, ask for recent photos or video, and only pay through secure, traceable methods.

This seller is not an Equipt Pro dealer. Equipt does not inspect items, handle payment or guarantee transactions. Verify the seller and equipment before sending funds.

7,940Listings|17Followers
Overview
Power Squaring Shears (Inch)

This used Accurpress 6.35×2500 shearing machine is available from VIGERT. It cuts sheet and plate metal to size.
Its fully welded, boxed-in bed table is built to resist twisting under cutting load and to hold blade clearance steady through the stroke. The shear is rated for structural quality steel up to 80,000 tensile and 44,000 yield strength.
Key Features
Fully welded boxed-in bed table with high torsion stiffness
Blades chosen to suit the shear capacity (high carbon, high chrome, or high carbon/shock resisting) and developed to minimise re-sharpening
Heavy-duty back gauge with precision ACME lead screws on roller bearings
Back gauge lifts mechanically at full rearward travel so longer pieces can be sheared
Blade clearance set by a hand lever on the side of the machine
Single control console for power, back gauge, stroke length and run mode
4 ft squaring arm on the left of the table with a steel rule in 1/16 inch and 1 mm increments
Applications
Cutting sheet and plate to size in metal fabrication shops
Squaring and trimming blanks for press brake bending
Cutting structural quality steel plate
Commercial Details
Make: Accurpress
Model: 6.35×2500
Condition: Used
Location: Nanjing, Jiangsu, China
Seller: VIGERT
Frequently Asked Questions
What material can this shear cut? It is rated for structural quality steel with typical properties up to 80,000 tensile and 44,000 yield strength.
How is blade clearance adjusted? Clearance is set manually with a hand lever on the side of the machine, turned to suit the gauge of metal.
Can it cut longer pieces? Yes, the back gauge lifts mechanically when run back to full travel, allowing longer pieces to be sheared.
What should I ask when enquiring? Ask for photos or video of the shear cutting under power, blade condition, the exact capacity of this unit, the control and electrical details, what is included, and loading and shipping arrangements.

Specs

Technical Specifications
Model: 6.35×2500
Rated material strength: Up to 80,000 tensile / 44,000 yield
Back gauge drive: Precision ACME lead screws on roller bearings
Squaring arm: 4 ft, with 1/16 inch and 1 mm scale

Loading...
Loading...
Loading...