USED 2016 DALLAS DPR-40,000 / DRFXS-872-RH / PPTSV-4-9-5T-72-RH

Coil Weight: 40000 pounds
Coil Width: 72 inches
Coil Thickness: .100 inches

40,000 lbs. x 72 Inch Dallas Industries 
Space-Saver Servo Coil Feed Line
Year 2016
40,000 lbs. Maximum Coil Capacity72" Maximum Coil Width.100" @ 72" Maximum Coil Thickness at Full Width20-24" I.D. Expansion Range72" Maximum Coil O.D.Dallas Ind. Space Saver Complete Coil Feed Line Specifications:
Dallas Ind. Coil Reel Uncoiler Model#: DPR 40,000# x 72
Three leaf mandrel coil reel
Hydraulic coil reel mandrel expansion
Motorized variable speed coil reel payout
Space saver loop control system
 
Dallas Ind. Traveling Coil Load Car Model#: LC-40,000# x 72
Coil load car track
Powered lift and travel
Narrow coil supports
Coil Hold Down Arm and Edge Guide System on Coil Reel
Hold down arm with motorized end wheel
Stock threading table
Stock peeler extension
Automated Coil Guide Rolls Interlocked with Load Car
Model#: CGR-40,000# x 72-RH
Coil Restrictor
Model#: CR-40,000# x 72-RH
Coil Hold Down Arm with Motorized End Wheel
 
Dallas Industries Thread Table with Peeler Blade Model#: PTT-72-RH
Dallas Ind. Servo Roll Feed Straightener Combination Press Feed Model#: DRFXS-872
Eight inch diameter full width upper and lower servo feed rolls
Matte chrome finish on servo feed rolls
Air operated upper servo feed roll adjustment / pilot (dual cylinder)
Centralized lubrication points
Roller stock width edge guides with individual or unison upper roll adjustments
Cabinet base mounted with heavy duty pass line adjustment
Motorized pass line adjustment
Solenoid controlled pilot release
Air pressure/regulators flush mounted in cabinet base
Nine coil straightening rolls
Individual upper coil straightening roll adjustments
Motorized coil straightener pinch roll for stock threading
Air operated upper coil straightener pinch roll adjustment
Cascade loop support rollers Stock width reference scale
AC servo roll feed drive and controls

Model#: PPTSV-4-9-5T-72-RH
Piloting Pull Thru Straightener
9 Roll Straightener
4” Diameter Straightening Rolls
 
Dallas Industries Servo Roll Feed Model#: DRFXS-872-RH
Dallas Feed Controls
8” diameter Feed Rolls
Matte Chrome Finish on Servo Feed Rolls
Air operated upper servo feed roll adjustment / pilot (dual cylinder)
Centralized lubrication points
Roller stock width edge guides with individual or unison upper roll adjustments
Cabinet base mounted with heavy duty pass line adjustment
Motorized pass line adjustment
Solenoid controlled pilot release
Air pressure/regulators flush mounted in cabinet base
Nine coil straightening rolls
Individual upper coil straightening roll adjustments
Motorized coil straightener pinch roll for stock threading
Air operated upper coil straightener pinch roll adjustment
Cascade loop support rollers Stock width reference scale
AC servo roll feed drive and controls
• 40 HP servo drive
• AB Powerflex 755 Drive on Ethernet
• Operator control console with eight feet of cable.
• Digital servo controller and a high performance AC brushless servo motor.
• Self diagnostic electronics.
• 200 job memory.
• Length setting in .001 inch increments.
• 10.0 full color touch screen.
• Touch screen display for length and speed job data entry (conventional trapezoidal motion profile).
• Hand help jog control pendent with fast or slow speed selection.
• Integrated jog to length for single stroke operation.
• Profile select job screen (smooth sinusoidal motion profile).

Engineered for heavy-duty pressroom automation, this 2016 40,000 lbs. x 72" Dallas Industries Space-Saver Servo Coil Feed Line delivers maximum efficiency, precise material handling, and a compact footprint for high-production metal stampers. Built to process heavy gauge materials up to 72" wide and .100" thick at full width, this complete coil processing line handles up to 72" maximum coil O.D. with a 20–24" I.D. expansion range. The system features a Dallas Model DPR 40,000# x 72 three-leaf hydraulic coil reel with motorized payout, an automated LC-40,000# x 72 traveling coil load car, a hold-down arm with a motorized end wheel, edge guide systems, and an integrated thread table with peeler blade for rapid, effortless stock threading.
 
At the heart of the line is the high-performance Dallas DRFXS-872 Servo Roll Feed / Straightener combination. Equipped with 8" diameter matte-chrome servo feed rolls, 9 coil straightening rolls with individual upper adjustments, motorized pass line adjustments, and air-operated dual-cylinder pilot release, it guarantees precision material conditioning and feeding accuracy. Powered by a heavy-duty 40 HP AC servo drive and an Allen-Bradley PowerFlex 755 drive on Ethernet, the advanced controls feature a 10.0" full-color touch-screen HMI, 200-job memory capacity, digital length entry in .001" increments, self-diagnostics, sinusoidal motion profiles, and a handheld jog pendant for seamless die setup. Available directly from S&G Press & Machinery Sales, this late-model, high-capacity space-saver coil line is an ideal turnkey solution for stamping operations looking to upgrade throughput without sacrificing floor space.