USED CINCINNATI 2EF73

PRICE:  Loaded on Truck, Our Warehouse, York, PA …… $24,500.00 AS IS
 
HMC Stock # 25074-C
Serial No.: 50302
Model: 2EF73
 
NOTE: This machine is being sold on consignment for a customer. It is located on our floor and is available to be inspected under power. There is no warranty or return privilege. The machine is offered AS IS.
 
Capacities:
Maximum Swing Over Table Extension: 23-1/2" (597 mm) - (Work-Head Parallel to Table Without Chuck Guard, Permits No Workslide Travel, Limited Table Travel)
Swing, Workhead Swiveled 90°: 13" (330 mm)
Swing Inside Standard Chuck Guard: 20" (508 mm)
Angular Adjustment of Workhead: 90°
Workhead Positioning Slide Travel: 17-1/2" (445 mm)
Maximum Table Travel: 20" (508 mm)
Grinding Traverse Stroke: 3/16" - 16" (4.76 - 406 mm)
Wheelhead Cross Slide Travel: 1-1/2" (38.1 mm)
Center of Workhead Spindle to Floor: 43-1/2" (1105 mm)
Distance Workhead Flange to Edge of Wheelslide: 0 - 25-3/4" (0 - 654 mm)
Automatic Wheel Feed - Diametric: .9999" (25 mm)
Wheelhead Mounting - 3 Positions - Total Adjustment: 7-1/2" (191 mm)
 
Speeds and Feeds:
Table Speeds for Grinding: 0 - 18 fpm (0 - 5.5 mpm)
Workhead Speeds - Reversible and Variable: 0 - 500 rpm
Rapid Traverse of Table: 18 fpm (5.5 mpm)
One Turn of Cross Feed Handwheel: .050" on dia. (1.3 mm)
Wheelslide Feed Increments: .00005" direct (.00125 mm)
One Turn of Workslide Handwheel: .100" (2.5 mm)
 
Drive:
Hydraulic Pump Motor: 1-1/2 hp @ 3450 rpm
Workhead Motor (dc): 1-1/2 hp @ 3450 rpm
Wheelhead Motor: 5 hp @ 3600 rpm
Coolant Pump Motor: 1/4 hp @ 1800 rpm
 
General:
Capacity of Oil Tank: 11 gal. (41.64 L)
Capacity of Coolant Tank: 55 gal. (208.2 L)
 
Equipped With:
(3) 12" Four Jaw Chucks
(1) 12" Four Jaw Chuck
15" Face Plate Mounted to Work Head
Rear Mounted Wheel Dresser
Red Head Grinding Spindle with 6" Arbor
Wired for 3 Phase 440 Volts
 
Overall Size: 120" x 72" x 86" High x Approx. 11,000 lbs.