Starting with a heavier cast iron base and saddle to assure less vibration than VMC’s with a fabricated base.
1.57" (40mm) double nut pre-tensioned ballscrew, directly coupled to the servo drive motor on all 610-1300 models, 1.96" on 1600, gives stronger, more precise and durable operation than machines with only 1.26" (30mm) ballscrews.
Duplex angular contact bearings support both ends of all ballscrews, far superior to lower cost single radial bearings.
High performance spindle fitted with 2+2 matched super precision bearings for greater long term precision and accuracy, even during heavy cutting.
| X | 62.9" | 1,597.7 mm |
| Y | 31.4" | 797.56 mm |
| Z | 27.5" | 698.5 mm |
| Power | 20 hp | 14.9 kW |
| RPM | 4,000 RPM | 4,000 RPM |
| # ATC | 24 | 24 |
| Taper | CAT-50 | CAT-50 |
| Table-W | 32.1" | 815.34 mm |
| Table-L | 66.9" | 1,699.3 mm |
| # Axis | 3 | 3 |
