NEW PRECISION MATTHEWS MACHINERY CO PM-30MV
Overview
PM-30MV Main Features
MUCH Larger Travels and work area
Quill DRO Included Standard (This is for the spindle up/down movement)
3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling - Much improved over the single bolt mount type
Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range
0.001" Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately - (One line on the dial is 0.001", one full turn of the handwheel is 0.100", much easier to use than those with odd metric conversions)
50-3000 RPM variable speed with the turn of a knob, properly set up with Low and High for a wider speed range, and plenty of power at lower speeds
Precision ground ways for smoother movements - Not just rough milled
Thrust Bearings in leadscrew ends - not bushings - Much smoother movements and less backlash
Split nuts on X and Y Axis to allow for backlash adjustment
DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped)
3 Year Warranty, for added peace of mind
PM-30MV Standard Equipment
PM-30MV Milling Machine
Chip Tray
Variable Speed with Belt Drive and Brushless DC Motor
Way Cover Set
Drawbar
R8 Spindle Tape
Quill/Spindle Depth DRO
Spindle Locking Wrench
PM-30MV Optional Accessories
Stand
3 Axis DRO Installed Note: if a 3 axis DRO is added to the machine, the 3rd axis of the DRO reads the HEAD up and down, Not the quill, so it is not doubling up on the measurement. If you add the 3 axis DRO, now both Z Axis movements are covered)
Optional DRO is now our PM LCD DRO as shown here:
Specs
PM-30MV
[Main Specifications]
Milling Machine Type: Bench Type Mills
Headstock Tilt, Left to Right: ±90°
Drawbar Thread: 7/16-20
Spindle Taper: R8
Spindle to Table Maximum: 17 in
PM Stand Height: 32"
Table Dial Graduations: 0.001"
Table Leadscrew Pitch: 10 TPI (0.100" per turn)
[Travels]
Mill X-Axis Travel: 23 in
Mill Y-Axis Travel: 8.75 in
Mill Z-Axis Travel: 14 in
Quill Travel: 3 in
[Table]
X-Axis Table Length: 33 in
Y-Axis Table Width: 8.25 in
T-slot size: 9/16", 14mm
[DRO Specifications]
[Power Requirements]
Amperage: 10
Voltage: 220V
Phase: 1PH
Power Frequency: 60Hz
Horsepower: 2
[Motor and Drive]
Motor Type: DC Brushless
Drive Type: Belt Drive
Speed Adjustment: Infinitely Variable
Spindle Minimum Speed: 50
Spindle Maximum Speed: 3,000
[Cutting Capacities]
Max Drilling Capacity: 1.25"
Max End Milling Capacity: 0.75"
Max Face Milling Capacity: 3.5"
[Unit Dimensions]
Unit Length: 30 in
Unit Width: 39 in
Unit Height: 39 in
Unit Weight: 530 lb
[Shipping Information]
Shipping Length: 44 in
Shipping Width: 34 in
Shipping Height: 49 in
Shipping Weight: 590 lb
Shipping Class: SC-F25LE
Liftgate Eligible: Yes
HS Code: 8459.69
Country of Origin: China
[Machine Footprint]
Footprint Depth: 31 in
Footprint Width X-Axis: 46.25 in
Footprint Height: 48 in
Bolt Pattern, Machine Base Mounting Holes: APPROX. 13-1/8”W x 15” Front to back, with 1/2" Holes. (we recommend waiting until your machine arrives before drilling any mounting holes in case this varies)
Table Surface Height (On Stand): 36" (with base w/leveling feet 40")
(These links below are 3rd party links, please do not contact us with questions or support as we are not affiliated with them. Contact the vendors directly for fit, pricing, availability, technical questions, etc. These links are only for your reference, all vendors are responsible for their own products below)
Power Head Lift, Power Drawbar, Spindle Brake and Quill Stop, Videos Below, More Info Here: Priest Tools PM-30MV aftermarket accessories
Z Axis power lift motor kit: Power Lift with Enclosure
Power Drawbar: https://youtu.be/p-or4qxVYeY
Spindle Brake and Quill Stop, https://youtu.be/VdCIo8lRSSU
CNC Conversion Kit Info and Links Below:
Arizona Video: Arizona Video CNC Kits
Procut CNC: Pro Cut CNC
Explore More New Equipment Listings on Equipt
Browse related New Bench Top Mills, Milling Machines, Metal Cutting, and Metalworking equipment, including PRECISION MATTHEWS MACHINERY CO machines for sale on Equipt.
New Equipment for Sale in Pennsylvania, United States
Find New Bench Top Mills, Milling Machines, Metal Cutting, and PRECISION MATTHEWS MACHINERY CO equipment for sale in Pennsylvania, United States, with related local Metalworking searches.
New Equipment for Sale in United States
Browse New Bench Top Mills, Milling Machines, Metal Cutting, and PRECISION MATTHEWS MACHINERY CO equipment for sale across United States, including related Metalworking inventory paths.
Sell Your Used Equipment
Find dedicated pages to sell used Bench Top Mills, Milling Machines, Metal Cutting, Metalworking, and PRECISION MATTHEWS MACHINERY CO equipment on Equipt.