USED 1969 WATERBURY FARREL 2 Hi Reversing
Overview
25"(635mm)x 42"(1066mm) WATERBURY FARREL 2-HI NON REVERSING ROLLING MILL (13129)
Specs
MACHINE # 13129
MANUFACTURER: WATERBURY FARREL
SPECIFICATIONS
MILL SECTION: 2 HI
MILL TYPE: NON REVERSING
MATERIAL: STAINLESS STEEL, CARBON STEEL
STRIP WIDTH DATA
MAXIMUM: 37IN/939.802MM
MINIMUM: 14IN/355.601MM
ENTRY GAUGE MAXIMUM: 0.125IN/3.175MM
EXIT GAUGE MINIMUM: 0.008IN/0.203MM
MAXIMUM COIL SIZE (WINDER) O.D.: 48IN/1219.202MM
COIL SIZE (WINDER) I.D.: 20IN/508.001MM
MAXIMUM COIL WEIGHT:
ABSOLUTE COIL WEIGHT: 14,200LBS/6441.077747KG
MILL DATA/
MILL SPEED (MAX): 500FPM/152.40MPM
MILL SPEED (MIN): 250FPM/76.20MPM
MILL POWER, MAIN MOTOR: 250HP/186.424968KW
650/1300 RPM, WATER COOLED, EDDY CURRENT CLUTCH
44O VOLT, 3PH, 60 CYC
PINION STAND RATIO16.8 : 12 SPEED
MILL ROLLS
WORK ROLL NOMINAL DIAMETER: 25IN/635.00127MM
BACK UP ROLL DIAMETER42IN/1066.802134MM
MILL BEARINGS , ROLLER TYPE/
WINDERS
WINDER POWER: 150HP/111.8549808KW
WATER COOLED, EDDY CURRENT CLUTCH
440 VOLT, 3 PH, 60 CYC
WINDER MANDREL:
DIAMETER: 20IN/508.001016MM
FACE: 42IN/1066.802134MM
MANDREL TYPE: EXPANDABLE, 19.687" CLOSED
WINDER TENSION:
MAXIMUM: 15,000LBS/6803.955366KG
INTERMEDIATE TO 650 FPM: LBS/0KG
MINIMUM: 9,900LBS/4490.610542KG
GEAR REDUCER RATIO15.22 : 1
PAYOFF
POWER: 3HP, AC/2.237099616KW
TENSION: 8,332LBS/3779.370407KG
SPEED: 500FPM
MANDREL DIAMETER: 17.5IN/444.5MM
NOMINAL: 21.521.5IN/546.1MM
(WITH FILLERS): 25.0IN/635.0MM
WATER COOLED BRAKE, MANUAL EDGE CONTROL
COOLANT -FILTER SYSTEM:
MILL DIRECTION: RIGHT TO LEFT
LINE CONFIGURATION
COIL CAR: FIXED, HYDRAULIC LIFT
PAYOFF REEL: PAPER WINDER
ENTRY BRIDGE TABLE: HYDRAULIC OPERATION
SENSING HEADS
DEFLECTOR ROLL:
MAIN MILL FRAME: (2) 20" DIA HYDRAULIC CYLINDER LOAD/ADJUSTMENT
ROLL POLISHING TOP AND BOTTOM
ROLL CHANGE SLED
DEFLECTOR ROLLPIVOTING FOR LOAD CELL
WINDER (LEFT):
COIL CAR: HYDRAULIC LIFT
PAPER WINDER
MOTOR DRIVE CONTROLS:
OPERATOR CONTROL CONSOLE
OVERALL FLOOR DIMENSIONS, (L-R / F-B): 26 FT X 33 FT
MILL IS DISMANTLED AND LYING IN STORAGE
**TEMPORARY SPECIFICATIONS SUBJECT TO REVISIONS**
**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
Explore More Used Equipment Listings on Equipt
Browse related Used Rolling Mills, Roll Formers & Rolling Mills, Fabricating, and Metalworking equipment, including WATERBURY FARREL machines for sale on Equipt.
Used Equipment for Sale in Connecticut, United States
Find Used Rolling Mills, Roll Formers & Rolling Mills, Fabricating, and WATERBURY FARREL equipment for sale in Connecticut, United States, with related local Metalworking searches.
Used Equipment for Sale in United States
Browse Used Rolling Mills, Roll Formers & Rolling Mills, Fabricating, and WATERBURY FARREL equipment for sale across United States, including related Metalworking inventory paths.
Sell Your Used Equipment
Find dedicated pages to sell used Rolling Mills, Roll Formers & Rolling Mills, Fabricating, Metalworking, and WATERBURY FARREL equipment on Equipt.