NEW LBC LRP1-60

BakerSeries® Roll-In Rack, Single Door Proofer               Model: LRP1-Series (LRP1-60)
Roll-In Rack Proofers
Essential for Uniform Proofing of a Wide Variety of Products at Varying Times.
Also be sure to see the Lang Proofer/Retarder Units!
* Most Accurate in the Industry
* Up to 95% Relative Humidity with a Temperature Range of 80°F – 120°F
* Depth increases by adding 20" or 30" Panels
* Stainless Steel Construction with Aluminized Top and Optional Stainless Steel Floor
* Accommodates (2) single side-load, (2) single end-load and (1) double roll-in racks.
  style lift. (Scroll Down to View Rack Accommodations for this particular model)
  Click HERE to view LBC Oven Racks

POWER
Electrical Available in 208V or 240V; 1 or 3 phase
kW: See Spec Sheets (PDF)

NOTES
All Models Shipped Knocked Down; Assembly Required

Water Treatment Requirements: 
*Cold water, 30 to 80 PSI
*pH between 6.8 and 7.6
*Conductivity less than 1/500,000 ohms per inch
*Total dissolved solids less than 100 parts per million
*Hardness from 5.3 to 7.3 grains per gallon

*Maximum Salinity Ion Content:
*Chlorine less than 0.5 parts per million
*Chlorides less than 30 parts per million
*Sulfates less than 40 parts per million
*Iron less than 0.1 parts per million
*Copper less than 0.05 parts per million
*Manganese less than 0.05 parts per million
*Chloramines less than 0.5 parts per million

 

MODEL/RACK CAPACITY GUIDE

Model / Depth Side-Load
28.4"W X 18"D End-Load
26"W X 20.4"D

LRP1-40 1 Rack 1 Rack

LRP1-50 2 Racks 1 Rack

LRP1-60 2 Racks 2 Racks

LRP1-70 3 Racks 2 Racks

LRP1-80 3 Racks 3 Racks

LRP1-90 4 Racks 3 Racks

LRP1-100 4 Racks 4 Racks

LRP1-110 5 Racks 4 Racks

LRP1-120 5 Racks 5 Racks

Racks Sold Separately:
Click HERE to view LBC Oven Racks
 

 

CONSTRUCTION FEATURES
Heavy duty stainless steel exterior with 300 Series Stainless Steel interior and aluminized steel top

Modular wall and ceiling panels, designed for cam-lock on-site assembly

Gasket seals provided at all seams and panel joints

Quick response air-wash humidity/heat system

Designed for dual voltage 208 or 240-Volt, single or three phase power input

Heavy duty door with removable  magnetic door seal and closure system.

PERFORMANCE FEATURES
70-120°F Temperature  Range

Very accurate relative humidity control with 50-95% operating range.

Same heating elements generate both heat and humidity.
[No submerged elements]

Interior bumpers protect proofer walls from rack damage

Full width grab bar handle protects door from rack dents

CONTROL PACKAGE
All controls located above door.

Digital set TEMPERATURE, set HUMIDITY & TIME remaining displays

Set temperature touch pads
[1°F increments]

Set relative humidity touch pads
[1% increment.]

STANDARD PRODUCT WARRANTY
One year, parts & labor