NEW LBC LRPR2-100HO

LBC Roll-In Rack High Output Retarder/Proofer (2 Door)
Automatic Retarding, Slacking and Proofing of a Wide Variety of Products at Varying Times and Temperatures. High Output (HO) models designed for large operations and for "Green Dough" or scratch mixed bakeries.
Model LRPR2-100HO  100" Deep
(11 Single Side Load Racks, 10 Single End Load OR 5 Double Side Load Rack Capacity)
–  Racks Sold Separately. To View LBC Racks – Click Here

Same features and benefits as Standard Duty retarder/proofer

Increased pull-down capacity

Built on same solid base as proofer

Epoxy-Coated Evaporator Coil assure long life.

Optional Condenser

Includes Evaporator, Expansion Valve and Refrigeration Solenoid Valve
(Configured for R404a optional condenser)

Proof, Retard or Operate in Automatic Mode

CONSTRUCTION FEATURES:
Heavy duty stainless steel exterior with 300 Series stainless steel interior and aluminized steel top

Walls, ceiling and door are foam insulated

Modular wall and ceiling panels, designed for cam-lock on-site assembly

Gasket seals provided at all seams and panel joints

Quick response air-wash humidity/heat system with epoxy coated coils

High capacity refrigeration system

Designed for dual voltage 208 or 240 Volt, single or three phase power input

Heavy duty door with removable magnetic door seal and mechanical closure system.

PERFORMANCE FEATURES:
Dual purpose unit provides both dough proofing and retarding capabilities

70-120°F proofing temperature range

34-45°F retarding temperature range

Very accurate relative humidity control, with 50-95% operating range.

Same heating elements generate both heat and humidity. (No submerged elements)

Large evaporator sized for high humidity levels, to prevent drying

High capacity refrigeration system for fast temperature pull-down

All power supply components mounted above door, with unit front access

Interior bumpers protect proofer walls from rack damage

Full width grab bar handle protects door from rack dents.

CONTROL PACKAGE
All controls located within the right side door, at eye level

Digital set TEMPERATURE, set HUMIDITY & TIME remaining displays

Real time-of-day and automatic proof-start-time setting

Set temperature touch pads (1°F increments)

Set relative humidity touch pads (1% increments)

POWER
 
Electric: Available in 208V or 240V; 1 or 3 Phase
kW: see Spec Sheet (PDF)
Optional condenser powered separately.

 
NOTES
All models are shipped Knocked Down; Assembly Required

Water Treatment Requirements: 
 
*Cold water, 30 to 80 PSI
*pH between 6.8 and 7.6
*Conductivity less than 1/500,000 ohms per inch
*Total dissolved solids less than 100 parts per million
*Hardness from 5.3 to 7.3 grains per gallon

*Maximum Salinity Ion Content:
*Chlorine less than 0.5 parts per million
*Chlorides less than 30 parts per million
*Sulfates less than 40 parts per million
*Iron less than 0.1 parts per million
*Copper less than 0.05 parts per million
*Manganese less than 0.05 parts per million
*Chloramines less than 0.5 parts per million

 
STANDARD PRODUCT WARRANTY
One Year, Parts & Labor (Mfg Warranty)