USED JOHN DEERE 3025E

This 2021 John Deere 3025E for sale in Jamestown, Tennessee, combines low reported hours with the features buyers frequently search for in a compact utility tractor. Priced at $24,900 OBO, it has only 195 seller-reported hours and comes equipped with 4WD, hydrostatic drive, differential lock, a John Deere 300E front-end loader, seller-reported 62-inch bucket, three-point hitch, and 540 RPM rear PTO.
Powered by a roughly 25 HP Yanmar diesel engine, the 3025E is designed for acreage maintenance, loader work, small farms, landscaping, livestock chores, grading, mowing, and general property work. Deere published the model with approximately 19.4 PTO horsepower and a two-range hydrostatic transmission. John Deere
The seller describes this low-hour compact tractor with loader as being in great condition and reports that everything currently works as it should.
Available in Jamestown, Tennessee, this John Deere 3025E for sale is a low-hour 2021 compact utility tractor showing only 195 seller-reported hours and priced at $24,900 OBO. It combines 4WD, hydrostatic drive, differential lock, a John Deere 300E front-end loader, seller-reported 62-inch bucket, 540 RPM rear PTO, and three-point hitch capability in a compact tractor built for property maintenance, small farms, livestock operations, landscaping, driveway work, and general loader chores.
The seller describes this 2021 John Deere 3025E as being in great condition and reports that everything works as it should. With fewer than 200 hours, the tractor offers buyers a relatively low-hour example of Deere's 3E platform equipped with one of the attachments many compact-tractor buyers want most: a factory-compatible loader.
John Deere 3025E Compact Utility Tractor
John Deere classifies the 3025E as a compact utility tractor. Published Deere specifications for this model list a Yanmar liquid-cooled diesel engine, approximately 24.7 gross engine horsepower, 19.4 PTO horsepower, 4-wheel drive, a two-range hydrostatic transmission, and an independent 540 RPM rear PTO. Deere also lists a Category 1 rear hitch and hydraulic flow of approximately 9.3 GPM total, including a 5.3 GPM implement pump. John Deere
For buyers comparing a 4WD hydrostatic tractor for acreage or farmstead work, this configuration offers straightforward operation without giving up the traction and implement versatility expected from a compact utility tractor.
John Deere's current information on the model also highlights the 3025E's 4WD drivetrain, Twin Touch-style hydrostatic operation, and independent rear PTO. Buyers wanting additional factory information can review the John Deere 3025E product information.
Hydrostatic Drive and 4WD
The hydrostatic transmission is one of the strongest practical features of this tractor for loader and property-maintenance work.
Instead of repeatedly shifting gears during jobs that require frequent direction changes, hydrostatic drive allows the operator to transition between forward and reverse more conveniently. That can be especially useful when:

Loading mulch, gravel, feed, soil, or manure
Cleaning around barns or buildings
Grading and maintaining driveways
Landscaping
Moving materials around an acreage
Working in tighter areas where frequent repositioning is required

The tractor is also equipped with 4-wheel drive and differential lock, giving the operator additional traction when working on loose ground, slopes, wet areas, gravel, or during loader work. Deere's December 2021 specifications confirm 4WD, a two-range HST transmission, and differential lock for the 3025E platform. John Deere
John Deere 300E Front-End Loader
This compact tractor with loader includes a John Deere 300E front-end loader and a seller-reported 62-inch bucket, significantly expanding what the tractor can handle compared with a tractor-only configuration.
John Deere specifically lists the 300E as compatible with the 3025E. Published specifications for the non-self-leveling 300E show approximately 1,186 lb of lift capacity at full height measured at the pivot pin, approximately 845 lb at 500 mm ahead of the pivot, and an approximately 84-inch maximum lift height. Actual lifting performance depends on configuration, ballast, attachment, load position, and operating conditions. John Deere
That makes the loader useful for typical compact-tractor tasks such as moving dirt, mulch, gravel, feed, snow, landscape material, and other properly sized loads.
John Deere's December 2021 factory literature lists a 61-inch quick-change material bucket with the factory-installed 300E loader package. The seller describes the bucket with this tractor as 62 inches, so buyers for whom exact bucket width is important should confirm the installed bucket measurement directly. John Deere
Additional technical information is available through the John Deere 300E Loader specifications.
PTO and Three-Point Implement Capability
This 3025E is not limited to loader work. It also has a 540 RPM rear PTO and three-point hitch, allowing it to work with appropriately sized rear implements.
Deere published the 3025E with approximately 19.4 PTO horsepower and an independent rear PTO. Published 3E Series information lists a Category 1 hitch with approximately 1,356 lb lift capacity measured 24 inches behind the center link. John Deere
Depending on implement requirements, this can make the tractor suitable for equipment such as smaller rotary cutters, finish mowers, blades, landscape rakes, spreaders, and other Category 1 implements. Buyers should always match PTO horsepower, implement weight, ballast requirements, and hitch capacity to the specific attachment being considered.
Low 195 Reported Hours
One of the biggest distinguishing features of this used John Deere compact tractor is the hour count.
At only 195 seller-reported hours, this tractor has accumulated relatively little operating time for a 2021 model. Hours alone do not determine mechanical condition, so buyers should still inspect service points, fluids, loader pins and bushings, tires, hydraulics, PTO operation, drivetrain performance, and overall condition before purchase.
The seller reports that the tractor is currently in great condition and that all functions operate as they should.
Practical Size for Farms and Acreage Owners
Published John Deere 3E specifications list the open-station 3025E at approximately 2,222 lb before loader, bucket, ballast, or other attachments, making it substantially more capable than a lawn or garden tractor while remaining compact enough for work around buildings, barns, landscaping, smaller properties, and confined farm areas. John Deere
This combination of manageable size, diesel power, 4WD, hydrostatic operation, loader capability, PTO, and three-point hitch makes the 3025E appealing to buyers who want one machine for several types of work rather than a tractor dedicated to a single task.
Buyers can also browse other smaller tractors and agricultural equipment through Trustworthy Equipment's agriculture marketplace.
Price and Buyer Considerations
This 2021 John Deere 3025E for sale in Tennessee is offered at:
$24,900 OBO
Included with the tractor are the John Deere 300E loader and seller-reported 62-inch bucket.
Trustworthy Equipment LLC is marketing this tractor on behalf of the seller and can help connect qualified buyers with the appropriate party. Financing assistance may be available to qualified buyers through independent financing providers, with approval and terms determined by the financing provider. Nationwide transportation assistance may also be available through independent transportation providers.
Serious buyers are encouraged to inquire for additional information, photographs, video, or to arrange an inspection. Buyers should independently verify the tractor's current condition, hour meter, bucket dimensions, attachments, and specifications important to their intended use before purchase.