Unused Enaqua 20 GPM Containerized 2-Pass Reverse Osmosis System

Manufacturer Information
Manufacturer: Enaqua
Equipment Type: Containerized 2-Pass Reverse Osmosis System
Year Built: 2012
Serial Number: VH008000Z04000
Condition: Unused; never run in production

Main Product Description

Unused Enaqua containerized 2-pass reverse osmosis system designed for brackish water treatment and production of approximately 20 GPM final permeate with TDS below 5 ppm. The first pass is designed for a 46 GPM feed rate through one array with inlet water rated at 40-80 psi and 85°F, producing approximately 30 GPM permeate with TDS below 100 ppm. The second pass is designed for a 25 GPM feed rate through two arrays at 40 psi, producing approximately 20 GPM permeate with TDS below 5 ppm. The complete system is installed in a 20-foot shipping container and requires 480V, 3-phase, 100-amp electrical service. Built in 2012, this system has never been run in production and is suited for industrial process water, high-purity water, brackish water purification, and other compatible reverse osmosis applications.

Specifications

• Manufacturer: Enaqua
• Equipment: Containerized 2-Pass Reverse Osmosis System
• Water Type: Brackish water
• Year Built: 2012
• Condition: Unused; never run in production
• Serial Number: VH008000Z04000
• Final Permeate Capacity: Approximately 20 GPM
• Final Permeate TDS: Less than 5 ppm
• Container: 20-foot shipping container
• Overall Shipping Width: Approximately 96"
• Overall Shipping Height: Approximately 102"
• Overall Shipping Length: Approximately 238"
• Electrical: 480V
• Phase: 3-phase
• Amperage: 100 amps
First-Pass Specifications:
• Feed Rate: 46 GPM
• Array Configuration: One array
• Inlet Water Pressure: 40-80 psi
• Design Water Temperature: 85°F
• Permeate Production: Approximately 30 GPM
• Permeate TDS: Less than 100 ppm
Second-Pass Specifications:
• Feed Rate: 25 GPM
• Array Configuration: Two arrays
• Feed Pressure: 40 psi
• Permeate Production: Approximately 20 GPM
• Permeate TDS: Less than 5 ppm

Applications

• Brackish water treatment
• Industrial process water purification
• High-purity water production
• Industrial reverse osmosis water treatment
• Process water preparation
• Compatible applications requiring approximately 20 GPM final permeate
• Two-pass RO applications requiring low-TDS product water
Suitable Products / Materials
• Brackish water
• Industrial process water
• Water requiring reverse osmosis purification
• Feed water compatible with the system's design specifications
• Process water requiring final permeate TDS below 5 ppm

FAQs

• What is the final permeate capacity of this Enaqua reverse osmosis system?
The second pass is designed to produce approximately 20 GPM of final permeate.
• What is the final permeate water quality?
The second-pass design specifies permeate with TDS below 5 ppm.
• What is the capacity of the first RO pass?
The first pass has a 46 GPM feed rate and is designed to produce approximately 30 GPM permeate with TDS below 100 ppm.
• Is this a single-pass or two-pass RO system?
This is a 2-pass reverse osmosis system. The first pass produces feed water for further purification through the second pass.
• Is the system containerized?
Yes. The complete system is built into a 20-foot shipping container.
• What electrical service does the system require?
The listed electrical requirement is 480V, 3-phase, 100 amps.
• Has the Enaqua RO system been used in production?
No. The system was built in 2012 and is described as unused and never run in production.
• What applications is this reverse osmosis system suitable for?
Possible applications include brackish water treatment, industrial process water purification, high-purity water production, and other compatible RO water-treatment applications requiring approximately 20 GPM final permeate.
• Can Aaron Equipment help with shipping this containerized RO system?
Yes. Aaron Equipment can assist buyers with coordinating shipping and logistics for industrial equipment. Contact Aaron Equipment for shipping options based on the equipment location and destination.
• How can Aaron Equipment help determine whether this RO system is right for my application?
Aaron Equipment can provide available equipment information and help buyers evaluate the system based on their required flow rate, water quality, electrical service, space requirements, and process needs. Final application suitability should be confirmed against the buyer's feed-water conditions and treatment requirements.