HEAVY-DUTY SHARP CHAIN SCRAGG MILL

This sharp chain scragg mill for sale in Mechanicsville, Maryland is offered as a complete small-log processing package for $59,999 OBO. Designed primarily for pallet cant production, the mill is intended for approximately 5- to 10-inch-diameter logs and includes brand-new adjustable heads with a seller-reported 3½- to 10-inch adjustment range.
Unlike a bare scragg mill, this package also includes the John Deere 6329 diesel engine used to power the mill, a Quincy air compressor, and associated operating equipment. The sharp-chain feed system and heavy fabricated construction make the setup relevant to pallet manufacturers, sawmills, and industrial wood-processing operations looking for dedicated small-log breakdown capability.
Contact Trustworthy Equipment LLC for additional details or to arrange an inspection.
Available in Mechanicsville, Maryland, this sharp chain scragg mill for sale is being offered as a much more complete wood-processing package than the mill alone. Priced at $59,999 OBO, the package includes the heavy-duty sharp-chain scragg mill, brand-new adjustable heads, a John Deere 6329 diesel engine used to power the mill, a Quincy air compressor, and the associated equipment the seller reports is included to operate the system.
The mill is intended primarily for processing smaller-diameter logs into pallet cants, with the seller describing approximately 5- to 10-inch-diameter logs as its primary working range. The new adjustable heads reportedly provide approximately 3½ to 10 inches of adjustment, giving the operator flexibility for different incoming material and desired cant sizes.
For a pallet manufacturer, sawmill, or industrial wood-processing operation, the significance of this package is that the buyer is not simply purchasing the scragg itself. The seller is including the diesel power unit and compressed-air equipment associated with operating the mill, potentially eliminating the need to separately source major support equipment after purchasing the processing line.
Heavy-Duty Sharp Chain Scragg Mill
This setup uses a sharp-chain feed configuration designed to move logs through the cutting section in a continuous production arrangement.
Sharp-chain scragg systems are particularly relevant to operations processing a regular supply of smaller roundwood. Instead of handling every log on a conventional carriage, the feed system is intended to move the material toward the cutting heads for initial breakdown into a more uniform cant.
The supplied photographs show a substantial fabricated-steel processing line with:

Long roller-supported material handling
Central sharp-chain feed
Heavy structural framework
Industrial cutting-head area
Multiple material-support rollers
Production-oriented sawmill construction

The seller describes the system as heavy-duty built.
Designed for 5- to 10-Inch Logs
The seller reports that this scragg is intended primarily for approximately 5-inch to 10-inch diameter logs.
That size range makes the machine especially relevant to mills working with smaller timber that may not justify processing on a larger conventional headrig.
Potential uses include:

Pallet cant production
Pallet-stock manufacturing
Small-log breakdown
Industrial lumber processing
Rough cant production
Secondary-sawmill production
Hardwood and softwood processing operations
Preparing material for resaws or gang saws

Once the log is converted into a cant, it can be moved into whatever secondary processing equipment the buyer's existing production system uses.
Brand-New Adjustable Heads
One of the strongest features of this particular mill is the seller-reported installation of brand-new adjustable heads.
The reported adjustment range is approximately:
3½ inches to 10 inches
That adjustability can be valuable to a pallet or sawmill operation processing different log diameters or producing more than one cant dimension.
The exact blade configuration, adjustment mechanism, cutting-head speed, and production dimensions should be confirmed during inspection, but the new heads represent a significant upgrade compared with purchasing a scragg that immediately requires cutting-head work.
John Deere 6329 Diesel Power Unit Included
This package also includes a John Deere 6329 diesel engine, which the seller reports is the power source used to operate the mill.
The supplied photograph shows the stationary diesel power unit mounted on a fabricated steel frame with its radiator, controls, driveline components, and associated equipment.
This is important because the mill is not being marketed as a bare processing machine requiring the buyer to independently determine and purchase an engine or other primary power source.
The John Deere 6329 diesel power unit goes with the package.
Because horsepower, engine serial number, engine hours, and detailed service history have not yet been supplied, buyers should verify the engine identification plate and operating specifications during inspection.
Quincy Air Compressor System Included
The seller is also including a Quincy air compressor and the associated equipment used with the system.
The photographs show additional stationary equipment accompanying the diesel power unit as well as a large steel air-system tank/manifold equipped with multiple fittings, valves, outlets, and pressure gauges.
According to the seller, the compressor setup and related components are included as part of the equipment needed to operate the mill.
This substantially changes how the package should be viewed. A prospective buyer is purchasing a processing setup that includes:

Sharp-chain scragg mill
New adjustable cutting heads
John Deere 6329 diesel power unit
Quincy air compressor
Air-system equipment shown with the package
Associated drive/support equipment included by the seller

The exact Quincy model, compressor output, receiver capacity, maximum operating pressure, and air requirements of the mill should be confirmed before installation.
Complete Production Package
For the right buyer, the value here is in acquiring the major components together.
Building a scragg operation from separate pieces can require sourcing the mill, power unit, compressor, driveline components, controls, air receiver, fittings, and other supporting equipment independently.
The seller reports that this package includes the equipment used to run the mill, giving a buyer a stronger starting point for installation into an existing pallet or lumber-production operation.
That does not mean the equipment should be assumed to be a plug-and-play installation at a new facility. Foundations, guarding, plumbing, electrical components, exhaust routing, material handling, and site-specific safety requirements will depend on the buyer's facility and production layout.
Pallet Cant Production
The seller specifically identifies pallet cant production as the primary application for this scragg mill.
A machine like this can serve as the primary breakdown stage in a pallet-lumber operation. Smaller logs are converted into cants, which can then continue through secondary equipment such as:

Gang saws
Resaws
Edgers
Trim saws
Pallet-part processing equipment

Operations with access to lower-diameter timber may find a dedicated small-log scragg particularly useful because it provides a production method specifically intended around that material.
Buyer Considerations
Because this appears to be a specialized or custom-built processing system rather than a currently identified factory model, serious buyers should verify several operational details during inspection.
Important items include the exact:

Cutting-head configuration
Saw/blade dimensions
Head adjustment method
Feed speed
Production rate
Maximum and minimum log length
Maximum practical log diameter
Engine serial number
Engine operating hours
Engine horsepower and rated RPM
Driveline arrangement
Quincy compressor model
Compressor CFM
Maximum compressor pressure
Air receiver capacity
Pneumatic requirements
Control configuration
Overall mill dimensions
Transport weight
Loading requirements

The seller previously supplied a log-length figure written as "18–16 ft." Because that wording is unclear, a definite supported log-length range should be confirmed before publication as a firm specification.
Price and Location
This complete sharp chain scragg mill package is located in Mechanicsville, Maryland and is currently offered at:
$59,999 OBO
Included with the sale are the scragg mill, brand-new adjustable heads, John Deere 6329 diesel power unit, Quincy air compressor, and the associated supporting equipment the seller reports is used to operate the system.
For a pallet manufacturer, sawmill, or wood-products company wanting a small-log processing system without sourcing every major support component independently, this package deserves consideration.
Contact Trustworthy Equipment LLC for current availability, additional photographs, seller information, or help coordinating an inspection.
Nationwide transportation assistance may be available through independent transportation providers.