Your Cart
You don't have any items in your cart.
New | in-Stock

CASE CX15EV

New Jersey, United States
313Listings|3Followers
Overview
Crawler Excavators - Mini

CASE CX15EV — ELECTRIC MINI EXCAVATOR

Here’s one that will put a charge into your business. The CASE CX15EV electric mini excavator opens doors so you can tackle jobs both inside and out. The beauty of this machine is that it can go anywhere. It’s easy to transport, and it can squeeze through almost any gate or doorway. The power will also put a jolt into your operation, with 16kw of power in the battery ready to get digging, all with no emissions, reduced noise and less lifetime maintenance thanks to the engine-less design. Plus, with no coolant or engine oil, daily checks are easy. Ready to plug into more productivity?

COLOR LCD MONITOR
Easy battery management, access to machine settings, joystick customization, work modes and auxiliary hydraulic settings are all there in full color.

PANOLIN BIODEGRADABLE HYDRAULIC OIL
The CX15EV was built from the ground up to be a more environmentally friendly machine.

4-8 HOURS OPERATING CHARGE
A single charge gives you up to a full day of work, and you can recharge overnight.

ELECTRIC MOTOR
Plenty of power is delivered to the load-sensing hydraulics for smooth, efficient, zero emissions and quiet operation.

HYDRAULICALLY RETRACTABLE TRACKS
Retract from 41” to 31” to easily fit through fence gates and doorways.

STANDARD DOZER BLADE
You get full-track width stability and backfilling; folds in to fit through gates and doorways.

STANDARD HIGH- AND LOW-FLOW HYDRAULICS
Dial in your hydraulics with electric proportional switches for precise operation.

EASY MAINTENANCE
Wide opening panels provide easy access for serviceability, along with tool-less access to hydraulic refill.

Built to punch above their weight, CASE mini excavators deliver dirt-dominating performance in a nimble package—small enough to trailer between jobs and strong enough to tackle even the most demanding applications. They’re the perfect tool for expanding your contracting capabilities. From the tried-and-true controls and comfort of CASE C Series mini excavators to the big benefits of our D Series lineup, these machines don't just dig up gold—they unearth new possibilities.

MINI EXCAVATOR FEATURES

TACKLE TIGHT SPACES
Swing boom helps you dig close to foundations, buildings, roads and obstacles, while zero tailswing lets you work confidently against walls and in tight spaces.

TAILORED PERFORMANCE
Up to 4 working modes — Power, Standard, Economy and User Specific — let you dial in engine throttle and rpm depending on the job.

MINI EX, MAX COMFORT
Revamped cabs with ergonomic controls and broad visibility keep you comfortable all day.

MAX COMFORT, MAX PRODUCTIVITY
Full heating and air conditioning, Bluetooth® radio and LCD display options on select machines let you tailor your in-cab experience for maximum on-the-job efficiency.

BIG REACH
All CASE mini excavators offer an optional long arm for extended reach — but with the CASE CX60D, that advantage comes standard, giving you greater digging depth and versatility right from the start.

FORESIGHT
Rear view camera* and LED work light options, plus an unlocking, stowable front window on CASE D Series mini excavators give you more convenience and clarity.

ALWAYS ON THE GO
A trailer-friendly operating weight means you can easily tow** your mini to whatever job is next.

PRECISE CONTROL
Proportional thumb-roller controls, simple switching between SAE and ISO control patterns and 1- or 2-way flow combination auxiliary hydraulics offer job-crushing attachment precision.

EASY MAINTENANCE
Wide-open swing-out access panels, grouped ground-level service checkpoints, wide engine compartments and tilting cabs* make maintenance a cinch — just open up, tune up and suit back up.

*Model dependent.
**Understand local regulations.

STANDARD EQUIPMENT
OPERATOR ENVIRONMENT
• Tiltable Roll-bar (ROPS/TOPS)
• Optional canopy (FOPS Level 1)

ELECTRICAL
• On-board battery charger (120 VAC)

HYDRAULICS
• Joysticks with Electro-Hydraulic proportional controls
• Electro-Hydraulic proportional swing control
• 1st Auxiliary (AUX1) circuit with Electro-Hydraulic proportional control
• Boom Lift cylinder and dozer blade cylinder protection

TRACK DRIVE
• 2-speed travel with Automatic Shift Down (from 2nd to 1st gear if more traction is required) and Shift Up
• Fully hydrostatic drive system
• Sealed and lubricated track rollers
• Track Tensioner Hydraulic adjustment with grease

LIGHTING
• Standard LED working lights (boom)

TELEMATICS
• myCASEConstruction – includes hardware and a 7-yr advanced data subscription for 2-way communication

OPTIONAL EQUIPMENT
OPERATOR ENVIRONMENT
• Canopy (FOPS Level 1)

ELECTRICAL
• Offboard Fast-Charger

VISIBILITY
• Extra LED working lights (roof)
• Rotating beacon

ATTACHMENTS
• Mechanical coupler
• Digging buckets

OTHER
• Optional long arm: 3 ft 9 in (1.15 m)

WARRANTY
BASE & EXTENDED WARRANTY COVERAGE
• 2yr/3,000 hours full machine limited warranty

PURCHASED PROTECTION
• Purchased Protection Plan is an extension of the factory base and extended coverage is available at an additional cost. Your CASE dealer can help you determine the plan that fits your needs.

Please see your CASE dealer for limitations, exclusions, and confirmation of policies in effect. The CASE Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity. Genuine CASE service parts or CASE approved service parts that meet CASE specifications must be used for maintenance and repairs.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

Specs

Nominal Battery Voltage: 102 Volts
Battery Chemistry: Lithium ion
Battery Capacity: 21.5 kWh
On-Board Charger: 120V 1 Phase
Charging Time 0 - 100%: 14 hr
Charging Time 20 - 80%: 8.5 hr
Off-Board Charger #1: 240V 1 Phase
Charging Time 0 - 100%: 5 hr
Charging Time 20 - 80%: 3 hr
Off-Board Charger #2: 208V 3 Phase
Charging Time 0 - 100%: 1.5 hr
Charging Time 20 - 80%: 1 hr
Off-Board Charger #3: 480V 3 Phase
Charging Time 0 - 100%: 1.5 hr
Charging Time 20 - 80%: 50 min
Run Time: 4-8 hours Depending on Application
Motor Type: Internal permanent magnet (IPM)
Motor Power: 21 hp (16 kW)
Motor Speed: Eco Mode: 2400 RPM
Motor Speed: Standard Mode: 2600 RPM
Motor Speed: Power Mode: 2800 RPM
Max Travel Speed: Turtle: 1.1 mph (1.8 kph)
Max Travel Speed: Rabbit: 2.4 mph (3.8 kph)
Traction force: 2,200 lbf (1 000 daN)
Gradeability: 30° (60%)
Ground pressure: 4.6 psi (0.32 kg/cm2)
: Tiltable Roll-bar (ROPS/TOPS); Optional canopy (FOPS Level 1); Vinyl seat; Height adjustable arm rests; Controls cut-out lever (safety lever); 2 in (51 mm) Seat belt; Bottle/cup holder; Keyed locks common w/ starting key; Document glove box; Slewing locking lever; Auxiliary electrical socket; Control Panel.
Controls: Travel Levers; Travel foot pedals; EH joysticks for boom, arm, bucket, and swing; Emergency stop button; Boom swing roller switch; Horn; Auxiliary hydraulics roller; Ignition switch; Blade control lever.
Display includes: Hydraulic Oil Temp; Machine hours; Time; Warning Indicators; Message area; Function Indicators; Work modes; Motor speed; Battery level indicator; Fast drive indicator;
Equipment selection; Control mode.
Standard Arm & Roll Bar: 3,130 lb (1 420 kg)
Standard Arm & Canopy: 3,186 lb (1 445 kg)
Long Arm & Roll Bar: 3,139 lb (1 424 kg)
Long Arm & Canopy: 3,194 lb (1 449 kg)
Mechanical quick coupler: 49 lb (22 kg)
Note: Weight includes bucket, 165 lb operator, fluids, full fuel tank
Hydraulic tank: Refill capacity: 2.5 gal (9.5 L)
Hydraulic tank: Total system: 4.0 gal (15 L)
Pump type: Low noise helical gear pump
Pump displacement: 0.62 in3 (10.1 cc)
Total flow rate: 7.4 gpm (28 L/min)
Operating Pressure: 2,600 psi (180 bar
Auxiliary flow: Aux. 1 – 1 or 2-way circuit: Max. Flow: 7.4 gpm (28 L/min)
Auxiliary flow: Aux. 1 – 1 or 2-way circuit: Max. Pressure: 2,600 psi (180 bar)
Auxiliary flow: Aux. 2 – 2-way circuit: Max. Flow: 2.6 gpm (10 L/min)
Auxiliary flow: Aux. 2 – 2-way circuit: Max. Pressure: 2,600 psi (180 bar)
Swing motor: Hydraulic drive units w/ axial pistons
Travel motor: Variable displacement hydraulic orbital gear motors, Auto-Shift 2-speed transmission, and hydraulic released parking brake
Swing speed: 9.5 RPM
Rubber tracks dimensions: 7.1 x 1.7 x 2.8 in | (180 x 43 x 72 mm)
Boom: Swing 60° left/70° right | Length 5 ft 1 in (1.55 m)
Arm: Standard length 3 ft 4 in (1.02 m) | Long arm length 3 ft 9 in (1.15 m)
Sound Pressure Internal – ISO6396 – LpA:
Canopy: 72 dBA
Sound Power External – LwA: 82 dBA
Arm: 3 ft 4 in (1.02 m) Arm
Overall height: 7 ft 7 in (2 300 mm)
Overall transport length: 10 ft 5 in (3 180 mm)
Width of upper structure: 2 ft 7 in (790 mm)
Track overall length: 4 ft 8 in (1 434 mm)
Track overall width - Retracted: 2 ft 7 in (790 mm)
Track overall width - Extended: 3 ft 5 in (1 050 mm)
Track shoe width: 7 in (180 mm)
Center to center – idler to sprocket: 3 ft 7 in (1 100 mm)
Minimum ground clearance: 5.7 in (145 mm)
Tail swing radius - Standard counterweight: 2 ft 4 in (710 mm)
Boom swing: 60° left/70° right
Tail swing overhang - Tracks retracted: 11 in (280 mm)
Tail swing overhang - Tracks extended: 6 in (150 mm)
Backfill blade height: 9 in (220 mm)
Backfill blade rise above ground: 9 in (225 mm)
Backfill blade dig depth: 9 in (225 mm)
Backfill blade width: 2 ft 7 in (790 mm) - 3 ft 5 in (1 050 mm)
Arm: 3 ft 4 in (1.02 m) Arm | 3 ft 9 in (1.15 m) Arm
Maximum dig radius: 12 ft 0 in (3 645 mm) | 12 ft 4 in (3 755 mm)
Dig radius at groundline: 11 ft 10 in (3 605 mm) | 12 ft 2 in (3 715 mm)
Maximum dig depth: 6 ft 9 in (2 045 mm) | 7 ft 2 in (2 175 mm)
Vertical straight wall dig depth: 5 ft 11 in (1 805 mm) | 6 ft 5 in (1 955 mm)
Dump height: 7 ft 6 in (2 290 mm) | 7 ft 10 in (2 380 mm)
Overall reach height: 10 ft 5 in (3 115 mm) | 10 ft 6 in (3 205 mm)
Arm digging force – ISO: 1,400 lbf (630 daN) | 1,304 lbf (580 daN)
Bucket digging force – ISO: 2,600 lbf (1 150 daN) | 2,600 lbf (1 150 daN)

Loading...
Loading...
Loading...