Your Cart
You don't have any items in your cart.
New | in-Stock

CASE CX30C

New Jersey, United States
313Listings|3Followers
Overview
Crawler Excavators - Mini

CASE CX30C — MINI EXCAVATOR

If you’re in a tight space, this is the machine to be tight with. It’s the CASE CX30C mini excavator. With an operating weight just north of 6,300 lbs., it’s a snap to transport. Fire it up, and you’ll find the 24.8 horsepower engine brings impressive breakout force – over 4,500 lbs. The zero tailswing design and adjustable offset boom let you operate where elbow room is at a premium. It also has automatic 2-speed travel, auxiliary hydraulics and easy access to all maintenance points. Plus, there’s a comfy cab sporting great visibility, perfect for seeing more jobs open up for you.

Check out the load of features and technology that make up the CASE CX30C mini excavator.

EXCELLENT REACH
You can dig deeper and and dump higher, and that means you can tackle bigger jobs.

STANDARD ONE/TWO-WAY COMBINATION AUXILIARY HYDRAULICS
The versatility to run a variety of attachments is standard on the CX30C. You can also add an optional second auxiliary hydraulic circuit for increased productivity.

BOOM SWING
Dig next to buildings or in other tight locations.

OPERATOR COMFORT
Spacious work environment features large entry door, optimized control layout, adjustable seat, 360 degree visibility and upper roof glass for additional visibility.

EASY MAINTENANCE
Swing-out side panels, ground-level service checkpoints and wide compartments offer easy access for maintenance and daily checks.

Built to punch above their weight, CASE mini excavators deliver dirt-dominating performance in a nimble package—small enough to trailer between jobs and strong enough to tackle even the most demanding applications. They’re the perfect tool for expanding your contracting capabilities. From the tried-and-true controls and comfort of CASE C Series mini excavators to the big benefits of our D Series lineup, these machines don't just dig up gold—they unearth new possibilities.

MINI EXCAVATOR FEATURES

TACKLE TIGHT SPACES
Swing boom helps you dig close to foundations, buildings, roads and obstacles, while zero tailswing lets you work confidently against walls and in tight spaces.

TAILORED PERFORMANCE
Up to 4 working modes — Power, Standard, Economy and User Specific — let you dial in engine throttle and rpm depending on the job.

MINI EX, MAX COMFORT
Revamped cabs with ergonomic controls and broad visibility keep you comfortable all day.

MAX COMFORT, MAX PRODUCTIVITY
Full heating and air conditioning, Bluetooth® radio and LCD display options on select machines let you tailor your in-cab experience for maximum on-the-job efficiency.

BIG REACH
All CASE mini excavators offer an optional long arm for extended reach — but with the CASE CX60D, that advantage comes standard, giving you greater digging depth and versatility right from the start.

FORESIGHT
Rear view camera* and LED work light options, plus an unlocking, stowable front window on CASE D Series mini excavators give you more convenience and clarity.

ALWAYS ON THE GO
A trailer-friendly operating weight means you can easily tow** your mini to whatever job is next.

PRECISE CONTROL
Proportional thumb-roller controls, simple switching between SAE and ISO control patterns and 1- or 2-way flow combination auxiliary hydraulics offer job-crushing attachment precision.

EASY MAINTENANCE
Wide-open swing-out access panels, grouped ground-level service checkpoints, wide engine compartments and tilting cabs* make maintenance a cinch — just open up, tune up and suit back up.

*Model dependent.
**Understand local regulations.

STANDARD EQUIPMENT
OPERATOR ENVIRONMENT
• ROPS/FOPS four post canopy or enclosed cab
• 2008 sound pressure level LpA=73.5bB (A)

HYDRAULICS
• Auxiliary hydraulics – single/bi-directional – and plumbing to arm
• Control pattern selector valve
• Cylinder rod protection covers – Dozer, Boom, Arm and Bucket

TRACK DRIVE
• Rubber belt tracks
• Automatic 2-speed travel
• Fully hydrostatic drive system
• Sealed and lubricated track rollers
• Track tension adjustment – grease type

OPTIONAL EQUIPMENT
OPERATOR ENVIRONMENT
• Cab with Heat and Radio with USB and 2 speakers

OTHER
• Hydraulic quick coupler provision
• Klac coupler
• Mechanical coupler
• Hydraulic hammer
• Beacon

WARRANTY
BASE & EXTENDED WARRANTY COVERAGE
• 2yr/3,000 hours full machine limited warranty

PURCHASED PROTECTION
• Purchased Protection Plan is an extension of the factory base and extended coverage is available at an additional cost. Your CASE dealer can help you determine the plan that fits your needs.

Please see your CASE dealer for limitations, exclusions, and confirmation of policies in effect. The CASE Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity. Genuine CASE service parts or CASE approved service parts that meet CASE specifications must be used for maintenance and repairs.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

Specs

Model: Kubota D1305
Emissions Certification: Tier 4 Final
Fuel: Diesel
Cylinders: 3
Displacement: 77.0in³ (1 261 cc)
Fuel injection: Mechanical
Gross horsepower – SAE J1995 @ 2300 RPM: 24.8 hp (18.5 kW)
Net horsepower – SAE J1349 @ 2300 RPM: 23.2 hp (17.3 kW)
Maximum Engine Torque @ 1600 RPM: 60.0 lb ft (81.4 Nm)
Cooling: Water-cooled
Travel speed - 1st: 1.5 mph (2.4 kph)
Travel speed - 2nd: 2.7 mph (4.3 kph)
Maximum traction force: 4,800 lb (2 177 kg)
Gradeability: 30° (58%)
Ground pressure: Canopy 3.8 psi (0.27 kgf/cm²) | Cab 4.1 psi (0.29 kgf/cm²)
Voltage: 12 Volts
Alternator rating: 40 amp
Battery: 1 x 12 V x 80 Ah | 630 CCA
General: ROPS/FOPS four post canopy; ISO 6396: 2008 sound pressure level LpA=73.5bB (A); Pilot operated hand controls and foot pedals; Adjustable seat w/seat belt; Arm rests; 12V socket.
Display: Engine oil pressure lamp; Water temperature lamp; Low fuel warning lamp; Battery charge lamp; Engine preheat lamp; Travel speed lamp; Air cleaner warning lamp; Hyd. quick coupler lock lamp; High travel speed lamp; Water temperature gauge; Fuel gauge and Hour meter.
Canopy operating weight: 6,306 lb (2 860 kg)
Cab operating weight: 6,636 lb (3 010 kg)
Note: w/rubber tracks/no quick coupler/bucket/fluids/full of fuel/165 lb operator.
Main pumps: Variable displacement tandem axial piston pump + gear pump
Max. rated flow: 2 x 7.3 + 5.2 gpm (2 x 27.6 + 19.6 L/min)
Auxiliary flow @ 3,133 psi (216 bar) - Primary: 12.2 gpm (46 L/min)
Auxiliary flow @ 3,133 psi (216 bar) - Secondary: 12.2 gpm (46 L/min)
System relief pressure - Standard: 3,130 psi (216 bar)
System relief pressure - Overload relief valve pressure: 3,410 psi (235 bar)
Pilot control hydraulic system - Pump: Gear Pump
Pilot control hydraulic system - Maximum capacity: 2.7 gpm (10.4 L/min)
Control valves: Pilot control for boom, arm, bucket, and swing | Mechanical control for left/right travel and backfill blade
Swing motor: Fixed displacement axial piston motor | Automatic spring applied hydraulic released brake
Travel motor: Variable displacement axial piston | 2-stage planetary | Automatic spring applied hydraulic released brake
Fuel tank: 7.9 gal (30 L)
Engine oil w/ filter change: 1.6 gal (5.9 L)
Radiator: 1.3 gal (5 L)
Refill capacity: 7.1 gal (27 L)
Total system: 14.5 gal (55 L)
Swing speed: 0 – 9.1 RPM
Undercarriage - Track rollers: 1 upper/4 lower each
Boom - Swing: 75° left/50° right
Boom - Length: 6 ft 8 in (2.03 m)
Arm - Standard length: 3 ft 8 in (1.12 m)
Arm: 3 ft 8 in (1.12 m) Arm
Overall height: 8 ft 2 in (2 500 mm)
Overall transport length: 13 ft 9 in (4 180 mm)
Width of upper structure: 4 ft 10 in (1 485 mm)
Track overall length: 6 ft 6 in (1 970 mm)
Track overall width: 5 ft 1 in (1 550 mm)
Track shoe width: 11.8 in (300 mm)
Track gauge: 4 ft 1 in (1 250 mm)
Center to center – idler to sprocket: 4 ft 11 in (1 490 mm)
Upper structure ground clearance: 1 ft 8 in (510 mm)
Minimum ground clearance: 11 in (290 mm)
Tail swing radius - Standard counterweight: 2 ft 6 in (750 mm)
Tail swing radius - Additional counterweight: 2 ft 10 in (875 mm)
Boom swing: 75° left /50° right
Tail swing overhang - Standard counterweight: 0 in (0 mm)
Tail swing overhang - Additional counterweight: 5 in (125 mm)
Backfill blade height: 1 ft 1 in (330 mm)
Backfill blade rise above ground: 1 ft 3 in (370 mm)
Backfill blade dig depth: 1 ft 6 in (450 mm)
Backfill blade width: 5 ft 1 in (1 550 mm)
Arm: 3 ft 8 in (1.12 m) Arm
Maximum dig radius: 15 ft 3 in (4 650 mm)
Dig radius at groundline: 14 ft 10 in (4 515 mm)
Maximum dig depth: 8 ft 2 in (2 500 mm)
Vertical straight wall dig depth: 6 ft 10 in (2 085 mm)
Dump height: 9 ft 7 in (2 930 mm)
Overall reach height: 14 ft 0 in (4 270 mm)
Bucket rotation: 177°
Arm digging force – ISO: 3,080 lbf (1 397 kgf/13.7 kN)
Bucket digging force – ISO: 4,520 lbf (2 050 kgf/20.1 kN)

Loading...
Loading...
Loading...