Your Cart
You don't have any items in your cart.
New | in-Stock

CASE 1150M WT

New Jersey, United States
313Listings|3Followers
Overview
Crawler Dozers

1150M WT − DOZER

M SERIES DOZERS
There’s a lot of dirt out there that’s in need of relocating. CASE M Series dozers are just the machines to push it to the right place. After all, these dozers are built of pure productivity. It starts with drawbar pull. It’s the envy of the industry and enables operators to move more dirt more efficiently. But these machines also offer finesse, thanks to easy, adjustable control of the drive and blade. The industry-leading visibility means you simply can’t get a better view of what you’re dozing. They all feature maintenance-free Tier 4 Final emission solutions. The spacious, positive-pressure cab offers lots of elbow room and keeps out dirt. We also updated the blade controls on 650M, 750M and 850M models. And with multiple track options, these bulls are ready to start reshaping the world.

The CASE 1150M is loaded with control and power. Because control and power equals productivity, and productivity equals money. It starts with industry-leading drawbar pull – 48,000 lbs. of dirt-relocating power. The engine features maintenance-free Tier 4 Final emissions. Coupled with optional machine control and customized operation settings, you can cut fuel costs, save time and take on more jobs. The visibility is unmatched, giving you the ability to grade close to buildings. And with easy access to maintenance points, you can maximize your uptime and grade a better bottom line.

FEATURES

PRIME-TIME DRAWBAR PULL
From our most compact machine to our heaviest earth mover, CASE dozers set the standard for drawbar pull, outshoving the competition. With drawbar pull ranging from 39,086 lbs. all the way up to 80,979 lbs., there’s a CASE dozer built to power through whatever job is in front of you.

PINPOINT CONTROL
CASE M Series dozers give you precision control like never before. Operators can dial in the shuttle (forward-to-reverse), steering and blade sensitivities to match their preference, experience level and site conditions – Smooth for very deliberate movement; Moderate for regular operation; and Aggressive for fast and immediate response. Plus, CASE dozers are ready to be equipped with a full range of 2D and 3D machine control solutions, including factory-fit machine control that allows owners to group the precision solution of their choice in the initial purchase.

OPTIMIZING THE LOAD
CASE M Series dozers feature a hydrostatic drive system and an advanced load management system that automatically reduces track speed (increasing torque) with a heavier load on the blade and increases track speed (reducing torque) with a lighter load on the blade, ensuring that the machine is working at optimal power and efficiency at all times.

INDUSTRY-LEADING VISIBILITY
CASE M Series dozers are designed to give you the best view of your surroundings, including down to the blade and tracks. With lots of glass, a low sloping front hood and an undercarriage that’s designed with robust, low-profile front idlers to further improve visibility to the ground, these dozers help you see all that’s important on the jobsite.

JOBSITE COMFORT
A true positive-pressure cab with advanced sealing helps keep out dirt, dust and noise — creating a working environment with one of the industry’s lowest sound ratings. The cab also features an isolated design that reduces cab vibration and provides a smoother ride. And the large, spacious cab is a snap to get in and out of, thanks to large doors that are easily released from both the interior and exterior.

EASE OF MAINTENANCE
From large hinged access panels to grouped service points, CASE M Series dozers are among the easiest to own and maintain — including extremely simple and field-proven emissions solutions to meet Tier 4 Final regulations.

And each CASE M Series dozer provides peace of mind and controlled owning and operating expenses with ProCare:
• Three-year, 3,000-hour full-machine factory warranty
• Three-year, 2,000-hour planned maintenance contract
• Five-year Advanced CASE SiteWatch™ telematics subscription

TRACK CONFIGURATIONS

LONG TRACK (LT)
Narrowest track width made for working in rocky and harder underfoot conditions.

WIDE TRACK (WT)
Great all-purpose track with excellent power and stability.

LOW GROUND PRESSURE (LGP)
Wide track with excellent flotation for working in softer conditions.

STANDARD EQUIPMENT

OPERATOR ENVIRONMENT
ROPS cab; Single lever control for speed, steering and direction; Cloth air suspension seat w/ back adjustment; Retractable 3 in (76 mm) seat belt; Adjustable armrest; Two foot rest; Rearview mirror; Two door windshield wipers; Dome light; 12-volt accessory outlet; Headliner; Floor mat; Rear Wiper; Radio; Heat/AC.

Warning lights: Air filter; Alternator; Diagnostic fault indicator; Engine coolant temperature; Engine oil pressure; Hydraulic filter; Low fuel level; DEF fluid level; Park brake engaged; Service soon indicator; Transmission filter; Transmission charge pressure.

Gauges: Battery voltage; Fuel level; Digital hour meter/ tachometer/diagnostic/service reminder; Transmission oil temperature; Transmission speed indicator; Water temperature: Diesel Exhaust Fluid (DEF) level.

Audible warnings: Engine coolant temperature; Engine oil pressure; Low fuel level; Transmission charge pressure; Temperature/hydraulic temperature.

ENGINE
• F4HFE613F*A002
• Tier 4 Final Certified
• SCR
• Automatic fan belt tensioner
• Integral engine oil cooling
• Fuel filter
• Dual element radial seal air cleaner
• 120 amp alternator
• (2) 950 CCA 12-volt batteries
• Anti-sandblast radiator
• Coolant Heated DEF Lines
• Pusher Fan
• Hinged engine side panels

DRIVETRAIN
• Dual path infinitely variable, single-lever controlled hydrostatic drive, with electronic straight tracking and counter-rotation
• Final drive: Triple reduction; helical gear/planetary decelerator with hydrostatic drive retardation
• Spring-applied hydraulic release parking brake

BLADE
• 55° – 60° variable pitch, with integral adjustment tool
• Single lever control for blade lift, angle and tilt

UNDERCARRIAGE
• Hydraulic track adjusters
• Sealed and Lubricated Track Chain (SALT)
• Permanently lubricated track and carrier rollers
• Track adjuster guard
• Track guides – front and rear
• Robust smooth one piece track frames with easy clean-out
• Robust rock guards
• Enhanced track recoil system
• Central grease point for pivot shaft and equalizer beam
• Low noise system configuration
• Low vibration system configuration

OTHER
• Backup alarm
• Horn
• Work lights: 2 front 1 rear
• Master disconnect switch
• Mirror
• Turbine Pre-cleaner
• Front pull hook
• Rear tow hook
• Environmental Drain
• Grid Heater/Cold Start
• Transport Protection
• Anti-vandalism package
• Rear transmission guard

TELEMATICS
• CASE SiteWatch™ Telematics – includes hardware and a 3-yr Advanced data subscription

PROCARE
• CASE ProCare – Full Machine Protection Factory Warranty (3-yr/3000-hr), Planned Maintenance (3-yr/2000-hr) and SiteWatch telematics

OPTIONAL EQUIPMENT

OPERATOR ENVIRONMENT
• Cab air quality system

HYDRAULICS
• 4-spool hydraulic valve for field-installed ripper

REAR MOUNTED EQUIPMENT
• Ripper – 5 position with 3 shanks
• Hydraulic pump with PTO
• Drawbar
• Drawbar with step

BLADES
• 120 in (3 050 mm)
• 132 in (3 355 mm)

GUARDS
• Sweeps
• Center rock guard

SCREENS
• ROPS rear screen
• Cab rear screen
• ROPS side screen
• Radiator brush screen
• Sandblast Screen

OTHER
• CASE Extended Life Track
• Additional work lights
• Front counterweight with pull hook
• Severe Cold Weather Package

PRECISION
• Factory Fit CoPilot
• Factory Fit 2D Laser
• Factory Fit 3D GNSS
• Universal Blade Guidance: Compatible with Leica, Trimble and Topcon
• Leica Blade Guidance Ready
• Trimble Blade Guidance Ready
• Topcon Blade Guidance Ready

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.

Specs

Model: FPT F4HFE613F*A002
Emissions Certification: Tier 4 Final Certified
Cylinders: 6
Displacement: 409 in³ (6.7 L)
Fuel injection: Common rail
Fuel: #2 Diesel
Fuel filter: Spin-on w/ in-line strainer
Air intake: Cross-flow
Cooling: Liquid
Oil filtration: Replaceable, spin-on full-flow cartridge
High idle - no load: 2200 +/- 50
Rated - full load: 2200
Low idle: 1100 +/- 25
Net: 127.4 hp (95 kW)
Gross: 138 hp (103 kW)
Pump: Deep sump plate cooler w/ pressurized under-piston nozzles
Side-to-side: 35°
Fore and aft: 45°
Fins per inch: 10.16
Diameter: 26.0 in (660 mm)
Ratio: 0.96:1
Dual path hydrostatic pump: Variable axial piston
Dual path hydrostatic motor: Variable bent axis piston
Max. drawbar pull: 48,000 lb (213.5 kN)
Transmission: Single lever control – electronic straight tracking
Transmission oil filter: 4 micron, spin-on replaceable w/ 100 mesh suction screen
Travel speed (Forward): 5.8 mph (9.3 kph)
Travel speed (Reverse): 5.8 mph (9.3 kph)
Parking brakes: Heavy-duty, spring-applied, hydraulic pressure release
Steering brakes: Hydrostatic
Final drive: 2 helical gear reduction to planetary output
Ratio: 61.4:1
Type: Oil to air
Core size: 498 in² (0.32 m²)
Alternator: 120 amp
Battery: (2) 12-volt, low-maintenance 925 cold-cranking amps @ -4° F (-20° C)
Electrical system: 24 Volts
General: Unit equipped w/ ROPS, full fuel tank, 170 lb (77 kg) operator, side shield, track guides, backup alarm, horn, lights and rear retrieval hitch.
Extra Long Track: 32,174 lb (14 594 kg)
Pump flow @ 2200 RPM @ 2,830 psi (19,512 kPA): 34.9 gpm (132 L/min)
Number of cylinders: Two (2)
Bore diameter: 4.25 in (108.0 mm)
Rod diameter: 2.00 in (50.8 mm)
Stroke: 19.21 in (488.0 mm)
Number of cylinders: Two (2)
Bore diameter: 4.50 in (114.3 mm)
Rod diameter: 2.50 in (63.5 mm)
Stroke: 18.33 in (465.7 mm)
Number of cylinders: One (1)
Bore diameter: 5.00 in (127.0 mm)
Rod diameter: 2.50 in (63.5 mm)
Stroke: 5.84 in (148.3 mm)
Fuel tank: 85.0 gal (322.0 L)
Engine oil w/ filter: 17.3 qt (16.4 L)
Engine oil w/o filter: 16.5 qt (15.6 L)
Engine cooling system: 7.4 gal (28 L)
Hydraulic reservoir: 51.0 gal (193 L)
Final drive – per side: 16.5 qt (15.9 L)
Track rollers – each: 0.26 qt (0.25 L)
Front idlers – each: 0.35 qt (0.33 L)
Carrier rollers – each: 0.26 qt (0.25 L)
DEF tank: 14.0 gal (52.0 L)
Track adjustment: Hydraulic
Frame: Pivot shaft and oscillating equalizer beam suspension
Length of track on ground (SALT-HD): 102.4 in (2 600 mm)
Length of track on ground (Max-Life): 101.0 in (2 566 mm)
Track link pitch: 6.9 in (175 mm)
Track shoe height: 2.17 in (55 mm)
Pin diameter: 1.44 in (36.58 mm)
Bushing diameter (SALT HD track): 2.45 in (62.6 mm)
Bushing diameter (Max-Life track): 3.11 in (79 mm)
Track shoes per side: 43
Track rollers per side: 7
Carrier rollers per side: 2
Track roller rail diameter: 7.99 in (203 mm)
Shoe area (22 in): 4,506 in² (29 070 cm²)
Shoe area (26 in): 5,320 in² (34 323 cm²)
Shoe area (30 in): 6,142 in² (39 627 cm²)
Wide Track: 22 in (559 mm) closed grousers and SALT HD | 26 in (660 mm) closed grousers and SALT HD | 26 in (660 mm) open grousers and MAX LIFE | 30 in (762 mm) closed grousers and SALT HD | 30 in (762 mm) open grousers and MAX LIFE
Variable blade pitch: 55° – 60°
Lift speed – per second: 17 in (503 mm)
Cutting edge: Reversible, replaceable
Width: 8.0 in (203.2 mm)
Thickness: 0.8 in (19.1 mm)
Max. penetration: 20 in (499 mm)
Width: 67.4 in (1 711 mm)
Cut width: 64.4 in (1 635 mm)
Max. ground clearance: 13 in (330 mm)
Max. number of shanks: 3
Tooth spacing - w/ 3 teeth: 30.9 in (785 mm)
Hydraulic cylinder: Double-acting
Hydraulic cylinder - Diameter: 4.0 in (102 mm)
Hydraulic cylinder - Stroke: 10.0 in (254 mm)
Hydraulic cylinder - Rod: 2.0 in (51 mm)
Track type: Wide Track (WT)
Blade width: 132 in (3 353 mm)
SAE blade capacity: 4.16 yd³ (3.18 m³)
Blade height: 44.1 in (1 119 mm)
Blade lift above ground: 36.4 in (926 mm)
Blade depth below ground: 20.4 in (518 mm)
Blade angle both directions: 25°
Cast reach: 14.5 in (368 mm)
Cut reach: -0.8 mm (-20 mm)
Blade tilt, each end – up to 8.3°: 17.7 in (450 mm)
Track gauge: 80 in (2.03 m)
Maximum shoe width: 26 in (660 mm)
Length of track on ground: 102.4 in (2 600 mm)
Area of track on ground: 5,320 in² (3.43 m²)
Ground pressure: 6.05 psi (0.42 bar)
Height to top of ROPS canopy: 9 ft 8 in (2 956 mm)
Height to top of cab: 9 ft 8 in (2 956 mm)
Ground clearance: 12.7 in (322 mm)
Length: Blade straight with drawbar: 16 ft 8 in (5 088 mm)
Length: Blade straight with ripper: 20 ft 4 in (6 191 mm)
Width: Blade straight: 11 ft 0 in (3 353 mm)
Width: Blade angled: 9 ft 11 in (3 041 mm)
Width: Over track: 8 ft 9 in (2 692 mm)

Loading...
Loading...
Loading...