USED VERONESI 1300 SFD 12250 FWP

Manufacturer Information
Veronesi
Veronesi is identified as the manufacturer of this industrial desludger disc-stack centrifuge. Disc centrifuges are used for high-speed separation and clarification of compatible liquid process streams, separating suspended solids from a continuous liquid phase.
This Veronesi AF 1300 SFD 12250 FWP features stainless steel product-contact areas, a stated capacity of approximately 6,900 liters per hour, and a reported rebuild.
Description
Available for sale is a used Veronesi AF 1300 SFD 12250 FWP desludger disc centrifuge featuring stainless steel product-contact construction and configured for liquid/solid clarification.
The centrifuge has a stated processing capacity of approximately 6,900 liters per hour (1,825 GPH). Its desludger disc-stack design is intended to continuously clarify compatible liquid streams while periodically discharging accumulated separated solids.
The unit is powered by a 15 kW / 22.5 HP drive motor rated for 380V, 50 Hz, 3-phase electrical service.
The equipment is described as a purifier design while the supplied process configuration is identified as a clarifier for liquid/solid separation. The exact installed bowl and separation configuration should therefore be verified for the intended process.
Serial number is 7809-12881, and the centrifuge is reported to have been rebuilt. Rebuild scope and documentation should be confirmed if required.
Specifications

Specification
Details

Manufacturer
Veronesi

Model
AF 1300 SFD 12250 FWP

Equipment Type
Desludger Disc-Stack Centrifuge

Condition
Used

Design
Purifier Design / Supplied as Clarifier Configuration

Separation
Liquid / Solid

Capacity
Approx. 6,900 L/H

Capacity – U.S.
Approx. 1,825 GPH

Product Contact Areas
Stainless Steel

Solids Discharge
Desludging

Drive Motor
15 kW / 22.5 HP

Electrical
380V / 50 Hz / 3-Phase

Serial Number
7809-12881

Rebuild
Reported Rebuilt

Primary Function
Clarification / Solids Removal

Typical Applications

Liquid clarification
Suspended solids removal
Process liquid purification
Sludge separation
Fine solids separation
Wastewater clarification
Process stream polishing
Industrial liquid processing
Continuous centrifugal separation
Product recovery
Liquid/solid separation
Process fluid cleanup

Products This Centrifuge Could Be Used For

Process water
Wastewater streams
Food process liquids
Beverage process streams
Fermentation liquids
Chemical solutions
Industrial process fluids
Oil-containing process streams
Liquid suspensions
Wash water
Compatible slurries with fine suspended solids
Other compatible liquid/solid mixtures

Actual suitability and throughput depend on feed composition, solids concentration, particle size and density, viscosity, temperature, required separation efficiency, bowl configuration, and current mechanical condition.
Frequently Asked Questions

What is the capacity of this Veronesi centrifuge? The stated throughput is approximately 6,900 liters/hour or 1,825 gallons/hour.

What type of separation is it configured for? The supplied specifications describe it as a liquid/solid clarifier. Because the unit is also identified as a purifier design, the installed bowl configuration should be verified.

Are the product-contact components stainless steel? Yes. The supplied information identifies the product-contact areas as stainless steel.

What motor is installed? The centrifuge has a 15 kW / 22.5 HP drive motor rated for 380V, 50 Hz, 3-phase power.

Has this centrifuge been rebuilt? The machine is reported rebuilt. The scope, date, replacement components, and supporting rebuild documentation should be confirmed if important to the purchase.

Can Aaron Equipment assist with shipping and logistics? Yes. Aaron Equipment can assist with rigging and loading coordination, domestic and international freight, customs documentation, and logistics planning for this Veronesi centrifuge.