USED KRAMER 520

2000 Kramer-Allrad 520 wheel loader for sale in Long Bottom, Ohio — now $24,499.
This used Kramer 520 commercial wheel loader has approximately 2,950 seller-reported hours and has recently received a $500 price reduction from $24,999.
Published specifications for this model generation describe a Perkins four-cylinder diesel producing approximately 71 horsepower, a hydrostatic transmission, permanent all-wheel drive, and hydraulic all-wheel steering.
Unlike traditional center-articulated wheel loaders, the Kramer-Allrad design uses a rigid frame and steering at both axles, providing maneuverability for agricultural, construction, landscaping, and commercial material-handling applications.
The Kramer 520 belongs to approximately the 5.5-metric-ton loader class, with published bucket capacities generally ranging from approximately 1.0 to 1.6 cubic meters depending on configuration.
Located in southeastern Ohio and marketed nationwide by Trustworthy Equipment LLC, this machine is available for buyer inquiries and further evaluation.
Available in Long Bottom, Ohio, this 2000 Kramer-Allrad 520 wheel loader for sale is a compact commercial loader showing approximately 2,950 seller-reported hours and now priced at $24,499, recently reduced by $500 from $24,999.
The Kramer 520 stands apart from many conventional wheel loaders because of its distinctive rigid-frame construction, hydraulic all-wheel steering, permanent four-wheel drive, and hydrostatic transmission.
Published specifications for the 520 Series 2 generation identify a Perkins four-cylinder diesel engine producing approximately 71 horsepower, along with a compact design intended to provide commercial material-handling capability in areas where larger articulated loaders can be difficult to maneuver.
For farms, livestock facilities, construction companies, landscaping contractors, material yards, and commercial property operations, this Kramer-Allrad 520 presents an opportunity to purchase a used diesel wheel loader with approximately 2,950 reported hours at a newly reduced asking price.
$500 Price Reduction — Now $24,499
The asking price on this 2000 Kramer 520 wheel loader has been reduced from $24,999 to $24,499, a $500 decrease.
Originally offered at $25,000, the machine is now available at its lowest advertised asking price to date.
Buyers searching for a used wheel loader in Ohio may find this unit worth evaluating, particularly if they need a compact machine with the maneuverability of all-wheel steering and the material-handling characteristics of a commercial loader.
Kramer-Allrad Rigid-Frame Design With All-Wheel Steering
One of the most distinctive characteristics of the Kramer 520 is its steering configuration.
Unlike traditional articulated wheel loaders that bend at a central pivot point to steer, the Kramer-Allrad design uses a rigid main frame with steering capability at both axles.
Published technical specifications for this generation describe hydraulic all-wheel steering, with a maximum steering angle of approximately 43 degrees and an outside turning radius near 9.8 feet.
This design was developed to provide tight maneuverability while maintaining the alignment of the machine's loader structure during steering.
The compact turning characteristics can be especially useful when working in locations such as:

Farmyards and livestock facilities
Barns and agricultural buildings
Landscaping supply yards
Construction sites with restricted access
Material storage facilities
Gravel and aggregate yards
Commercial properties
Equipment and machinery yards
Feed and bedding handling operations
Industrial material-handling areas

For operators who regularly maneuver around buildings, stacked materials, parked equipment, or other obstacles, the all-wheel-steering design is an important feature worth considering.
Perkins Four-Cylinder Diesel Engine
Published technical references for the 2000-era Kramer 520 Series 2 commonly identify a Perkins 1004-42 four-cylinder diesel engine.
The published engine configuration includes:

Approximately 4.23 liters of displacement
Four-cylinder diesel design
Water-cooled engine
Approximately 53 kW of rated power
Approximately 71 horsepower
Rated engine speed near 2,200 RPM

The Perkins diesel provides the power required for the loader's hydraulic systems, drivetrain, and material-handling functions.
The actual engine installed in this individual machine should be verified using its identification plate and serial number.
Hydrostatic Transmission and Permanent All-Wheel Drive
Published Kramer 520 Series 2 specifications describe a hydrostatic drive system with permanent all-wheel drive.
Hydrostatic travel control is particularly useful for wheel-loader applications that require frequent forward-and-reverse movement.
For example, an operator loading material into a truck, repositioning pallets, cleaning a livestock facility, or moving aggregate around a yard may benefit from smooth travel-speed control.
The permanent all-wheel-drive system is designed to provide power through all four wheels, while the all-wheel-steering configuration supports maneuverability.
Published technical information also references planetary final drives at the wheel hubs and differential-lock capability, depending on machine configuration.
Standard published travel speed is approximately 12.4 mph, with some references identifying an optional higher-speed configuration.
The actual speed range and drivetrain options on this loader should be confirmed before purchase.
Loader Hydraulics and Material-Handling Performance
The Kramer 520 belongs to a compact commercial wheel-loader class designed for lifting, loading, carrying, and transporting loose or bulk materials.
Published working hydraulic specifications for this generation include approximately 18.5 gallons per minute of hydraulic flow and 3,400 PSI of working pressure.
Published model information also identifies:

Maximum lifting capacity of approximately 6,967 pounds
Standard bucket capacity of approximately 1.31 cubic yards
Available bucket capacities up to approximately 2.09 cubic yards, depending on configuration
Maximum published dump height near 10 feet 8 inches

These figures represent published model-generation information rather than verified specifications for this particular loader.
Actual lifting and handling capabilities depend on the installed bucket or attachment, loading conditions, machine configuration, and applicable factory operating limits.
Maximum lifting capacity should not be interpreted as the machine's rated operating or payload capacity.
Prospective buyers should confirm the installed attachment, actual lifting specifications, and hydraulic operation before purchase.
Approximately 2,950 Seller-Reported Hours
The seller reports approximately 2,950 hours on this 2000 Kramer-Allrad 520.
Operating hours are an important consideration when evaluating used construction and agricultural equipment, especially on machines that have been in service for more than two decades.
However, the hour reading should be considered alongside the loader's maintenance history, current mechanical condition, previous applications, and overall wear.
At this stage, detailed service records, major repair information, and verification of the hour meter have not been provided.
Buyers are encouraged to inspect the machine, review its operating condition, and verify the reported hours.
Compact Commercial Loader Size
Published Kramer 520 Series 2 specifications place this machine in approximately the 5.5-metric-ton operating-weight class.
Technical references identify an operating weight of approximately 12,456 pounds with a 1.0-cubic-meter bucket, depending on the specific configuration.
The published standard tire size is 14.5-20.
This places the Kramer 520 in a size range that can appeal to buyers seeking commercial wheel-loader capability without moving into a substantially larger machine.
The rigid frame, four-wheel steering, and published turning radius are particularly relevant for equipment buyers working in confined commercial or agricultural environments.
Actual transport dimensions and operating weight should be confirmed before arranging shipping.
Agricultural, Construction, and Commercial Applications
The Kramer-Allrad 520 may be suitable for a variety of applications when properly equipped and operated within its rated capacity.
Agricultural applications
Farm operators may consider this type of loader for handling feed, bedding, bulk materials, and general farm supplies.
Landscaping and property maintenance
Landscaping contractors may use compatible loader buckets or other properly approved attachments for moving soil, mulch, gravel, and landscaping materials.
Construction support
Construction operations may benefit from a compact wheel loader for material movement, site cleanup, aggregate handling, and related support work.
Commercial and industrial yards
Businesses handling bulk materials or maintaining equipment yards may find the compact dimensions and maneuverability useful for their daily operations.
Seasonal property maintenance
With suitable equipment and attachments, this loader design may also be considered for snow-handling or other seasonal material-moving duties.
The actual bucket, attachments, and equipment included with this particular machine should be confirmed with the seller.
Condition, Inspection, and Buyer Considerations
This loader is currently being marketed with limited seller-provided mechanical and maintenance information.
The seller has reported approximately 2,950 hours, but additional information about current operating condition, recent repairs, tire condition, hydraulic performance, and equipment history has not yet been supplied.
Interested buyers should evaluate:

Cold-start and engine operation
Hydrostatic transmission response
All-wheel-steering operation
Hydraulic lift and tilt functions
Brake system operation
Tire condition and wear
Loader pins and bushings
Hydraulic hoses, fittings, and cylinders
Engine and drivetrain fluid leaks
Dashboard indicators and warning lights
Cab and operator controls
Bucket or attachment condition
Maintenance and repair history

An independent inspection and operational demonstration are recommended before completing a purchase.
2000 Kramer-Allrad 520 for Sale in Long Bottom, Ohio — $24,499
This 2000 Kramer-Allrad 520 wheel loader is located in Long Bottom, Ohio, and is now offered at $24,499 following a $500 price reduction.
With approximately 2,950 seller-reported hours, a compact rigid-frame design, published Perkins diesel power, permanent all-wheel drive, and hydraulic all-wheel steering, this machine deserves consideration from buyers looking for a used commercial wheel loader.
Trustworthy Equipment LLC is marketing this loader on behalf of the seller and can help connect qualified buyers directly with the appropriate party.
Nationwide transportation assistance may be available through independent transportation providers. Financing assistance may also be available to qualified buyers through independent financing providers, subject to approval and applicable terms.
Contact Trustworthy Equipment LLC for current availability, additional information, or assistance connecting with the seller.