USED AGILENT DADG1315B, COLG1316A, DEGASG1379A, BINPUMP G1312A, ALS G1329A

GLP features
Early maintenance feedback (EMF), electronic records of maintenance and errors

Communications
Controller-area network (CAN). GPIB (IEEE-448), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output

Safety features
Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display

Injection range

0.1 – 100 µl in 0.1 µl increments Up to 1500 µl with multiple draw (hardware modification

required)

Replicate injections
1 – 99 from one vial

Precision
Typically < 0.5 % RSD of peak areas from 5 – 100 µl, Typically < 1 % RSD of peak areas from 1 – 5 µl

Minimum sample volume
1 µl from 5 µl sample in 100 µl microvial, or 1 µl from 10 µl sample in 300 µl microvial

Carryover
Typically < 0.1 %, < 0.05 % with external needle cleaning

Sample viscosity range
0.2 – 50 cp

Replicate injections per vial
1 – 99

Sample capacity

100 × 2-ml vials in 1 tray

40 × 2-ml vials in ½ tray

15 × 6-ml vials in ½ tray (Agilent vials only)

Injection cycle time
Typically 50 s depending on draw speed and injection volume

Diode Array Detector G1315B Features:

Features:

Access the spectral domain with superior 3D optics-simultaneous illumination using combined deuterium and tungsten lamps for highest intensity and lowest detection limit from 190 to 950 nm, 1024 diodes and 1-nm slit for highest spectral resolution. 
Programmable slit helps you explore the spectral landscape for faster sample characterization-focus on fine bands with narrow setting, or if higher sensitivity is required open up the programmable slit for more light throughput. A broad slit ensures lowest baseline noise and highest chromatographic signal-to-noise. Store and report slit settings, from 1 - 16 nm, together with your raw data for GLP traceability. 
Spectral storage and flexible viewing -easily overlaid spectra within a run or between runs. 
Verify wavelength accuracy for GLP compliance-automatic holmium oxide filter (which can be set at the beginning of your chromatography) verifies that your wavelength is indeed what the setpoint says it is.

Degasser G1379A Specifications - 

Type
Specification

Maximum flow rate
10 ml/min per channel
5-10 ml/min per at reduced degassing performance

Number of channels
4

Internal volume per channel
Typically 12 ml per channel

Materials in contact with solvent
PTFE, PEEK