Grizzly G0602 - 10" x 22" Benchtop Metal Lathe
Overview
The Grizzly G0602 Benchtop Metal Lathe is the perfect size for garage or workshop at 10" x 22". It features a 25mm spindle bore, 1-3/4"- 8 TPI MT#4 headstock and an 1-1/4" MT#3 tailstock.
The 1 HP motor powers the spindle through six speeds from 150-2400 RPM.
This lathe comes equipped with a full featured carriage and apron assemblies that provide super accurate cuts and finishes. This Benchtop Metal Lathe will cut only right-hand threads.
The G0602 includes other exceptional equipment you’ll need to get up and running including: the hardened and precision-ground V-ways, 5" 3-Jaw chuck with two sets of jaws, 6-1/2" 4-jaw chuck with reversible jaws, 8" faceplate and 4-way tool post.
The G0602 comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.)
The G0602 manual was written by our U.S. based Documentation Department is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your lathe.
The Grizzly Technical Support team is U.S. based. Parts and accessories for the lathe are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO.
Specs
Motor: 1 HP, 110V, single-phase, 13.6A
Swing over bed: 9-1/2"
Swing over cross slide: 6-1/8"
Swing over saddle: 6-1/8"
Distance between centers: 22"
Bed width: 6-1/8"
Spindle bore: 25mm
Spindle type: Threaded, 1-3/4" x 8 TPI
Spindle taper: MT#4
Tailstock taper: MT#3
Tailstock quill travel: 2-1/2"
Cross slide travel: 6-1/2"
Compound travel: 3-1/2"
Maximum tool bit size: 1/2"
Spindle speeds: (6) 150–2400 RPM
Leadscrew: 3/4" x 12 TPI
Longitudinal feeds: (9) 0.0025, 0.0140 in./rev.
Inch thread range: (31) 8–72 TPI
Metric thread range: (26) 0.25–3.50mm
Footprint: 12-1/2" x 47-1/2"
Overall dimensions: 46" W x 22" D x 21" H
Approximate shipping weight: 432 lbs.
FEATURES:
Hardened and ground V-ways
Thread dial
Spindle reversing switch
Inch/metric dials
Emergency stop button
Quick-locking tailstock
Enclosed oil-bath gearbox
Chip tray and backsplash guard
INCLUDES:
5" 3-jaw scroll chuck with two sets of jaws
6-1/2" 4-jaw independent chuck with reversible jaws
8"faceplate
4-way turret tool post
MT#3 dead center
MT#4 dead center
Set of change gears
Follow rest
Steady rest
Bottle for oil
Tool box with service tools
Explore More New Equipment Listings on Equipt
Browse related New Bench Top Lathes, Lathes & Turning Machines, Metal Cutting, and Metalworking equipment, including GRIZZLY machines for sale on Equipt.
New Equipment for Sale in Ohio, United States
Find New Bench Top Lathes, Lathes & Turning Machines, Metal Cutting, and GRIZZLY equipment for sale in Ohio, United States, with related local Metalworking searches.
New Equipment for Sale in United States
Browse New Bench Top Lathes, Lathes & Turning Machines, Metal Cutting, and GRIZZLY equipment for sale across United States, including related Metalworking inventory paths.
Sell Your Used Equipment
Find dedicated pages to sell used Bench Top Lathes, Lathes & Turning Machines, Metal Cutting, Metalworking, and GRIZZLY equipment on Equipt.