USED NEW HOLLAND L320

MAJOR PRICE REDUCTION — NOW $42,000 OBO!

This 2026 New Holland L320 skid steer for sale in Glenmoore, Pennsylvania, has just received a substantial $6,000 price reduction from $48,000 to $42,000 OBO. With only 55 seller-reported operating hours, this is an excellent opportunity to inquire about an extremely low-hour machine at a newly reduced asking price.

Equipped with New Holland's Super Boom® vertical-lift design, open ROPS operator station, and foot controls, this 67 HP diesel skid steer offers a published 2,000-lb rated operating capacity for construction, farming, landscaping, and material handling.

The seller also reports remaining warranty coverage through March 2030 or 3,000 hours, subject to applicable terms and transferability.

The machine was purchased but ultimately not needed. The seller is motivated, wants it sold as soon as possible, and encourages reasonable offers.

Contact Trustworthy Equipment LLC today to discuss purchasing this low-hour New Holland L320.
Available in Glenmoore, Pennsylvania, this 2026 New Holland L320 skid steer for sale has undergone a substantial $6,000 price reduction, dropping from $48,000 to just $42,000 OBO. With only 55 seller-reported operating hours, an open ROPS operator station, foot controls, and New Holland's Super Boom® vertical-lift design, this machine deserves serious consideration from buyers looking for extremely low-hour construction or agricultural equipment.
The seller is ready to sell as soon as possible and is actively encouraging serious buyers to make a reasonable offer.
The reason for selling is simple: the skid steer was purchased but ultimately wasn't needed. Rather than keeping an almost-unused machine sitting, the seller has decided to reduce the price significantly to attract a buyer.
Another important selling point is the seller-reported warranty coverage through March 2030 or 3,000 hours, subject to warranty terms, applicable expiration conditions, and transferability.
For farmers, contractors, landscapers, equipment operators, and businesses considering the purchase of a new or lightly used skid steer, this L320 presents an opportunity worth investigating.
Major Price Drop — Now $42,000 OBO
The biggest recent development with this machine is the seller's decision to substantially lower the asking price.

Previous asking price: $48,000

New asking price: $42,000 OBO

Total reduction: $6,000

Percentage reduction: 12.5%

Seller motivation: Must sell as soon as possible

Offers: Reasonable offers are encouraged

This isn't a minor adjustment. The seller has reduced the asking price by thousands of dollars to help get the machine sold.
Buyers who were previously considering this L320 at $48,000 now have an opportunity to purchase it at a considerably lower asking price.
If you've been looking for a low-hour New Holland skid steer, now is the time to inquire. The seller wants this machine moved and is willing to consider reasonable offers.
2026 New Holland L320 Skid Steer for Sale With Only 55 Hours
One of the most appealing characteristics of this particular machine is its extremely limited reported use.
With only 55 operating hours, this L320 has accumulated far less operating time than the hundreds or thousands of hours frequently found on used skid steer loaders.
The seller reports that the machine was purchased but not ultimately needed for its intended purpose.
That makes this unit particularly interesting to buyers comparing newer equipment with older machines that have accumulated years of construction, farming, or commercial operating hours.
Hours alone do not determine mechanical condition, but the unusually low usage is an important consideration.
Prospective buyers are encouraged to verify the hour-meter reading and inspect the machine before purchase.
2,000-Lb Rated Operating Capacity and 67 HP Diesel Power
The New Holland L320 is a mid-size wheeled skid steer designed to combine lifting capacity, engine performance, and maneuverability.
According to the official New Holland L320 manufacturer specifications, the model offers:

67 gross engine horsepower

2,000 lb rated operating capacity

Approximately 4,000 lb tipping load

Approximately 6,470 lb operating weight

Super Boom® vertical-lift geometry

These specifications make the L320 suitable for a variety of agricultural, construction, commercial, and property-maintenance operations.
A 2,000-lb rated operating capacity offers useful material-handling capability without requiring the physical size of a much larger skid steer.
For businesses operating in restricted areas, barns, farmyards, construction sites, equipment storage facilities, and landscaping environments, that balance between capacity and machine size can be especially beneficial.
New Holland Super Boom® Vertical-Lift Performance
The L320 is equipped with New Holland's Super Boom® vertical-lift design, a feature that distinguishes it from conventional radial-lift skid steers.
The vertical-lift geometry is designed to provide useful lift height and forward reach when positioning materials above ground level.
Published L320 specifications include:

121-inch hinge-pin height

91.7-inch maximum dump height

29.8-inch dump reach at maximum height

For buyers who regularly load trucks, move pallets, handle feed, fill spreaders, transport bulk materials, or stack supplies, these lifting characteristics can offer practical advantages.
New Holland's design also supports applications involving buckets, forks, and other compatible loader attachments.
Open ROPS and Foot Controls
This machine has a seller-confirmed open ROPS operator station and foot-control configuration.
For operators accustomed to traditional skid steer controls, this arrangement provides a familiar operating layout.
An open operator station may also appeal to buyers working in environments where frequent entry and exit are common, including:

Agricultural buildings and livestock facilities

Landscaping and property maintenance

Construction and excavation sites

Farmyards and equipment storage areas

Commercial material-handling applications

Buyers specifically seeking an open-station New Holland skid steer should consider this configuration when comparing equipment.
Hydraulic Performance and Attachment Versatility
The L320's hydraulic system supports operation with compatible skid-steer attachments.
Published specifications commonly list approximately 20.6 GPM of standard auxiliary hydraulic flow, although the actual installed configuration should be verified.
Depending on hydraulic requirements and compatibility, applications may include buckets, pallet forks, bale spears, grapples, augers, trenchers, snow-removal equipment, and other implements.
Buyers planning to operate hydraulic attachments should verify the machine's actual auxiliary hydraulic configuration, couplers, and attachment requirements before purchase.
The presence of optional high-flow hydraulics has not been confirmed.
Compact Dimensions and Transport Considerations
Published New Holland information places the L320's operating weight at approximately 6,470 pounds, depending on configuration.
Its approximately 44.4-inch wheelbase provides a relatively compact operating footprint for a machine in the 2,000-lb rated-capacity class.
This can be important for contractors and agricultural operators who move equipment between properties or need to work around buildings, fences, vehicles, and other obstacles.
Buyers should confirm actual machine dimensions, attachment weight, trailer capacity, and towing requirements before transporting the skid steer.
Seller-Reported Warranty Through March 2030
Another substantial consideration is the warranty coverage reported by the seller.
The seller states that this machine carries full warranty coverage through March 2030 or 3,000 operating hours, subject to the applicable terms.
At only 55 reported hours, substantial time remains before the stated hour limit.
However, warranty coverage is controlled by the warranty provider. Buyers should verify the start date, covered components, exclusions, hour limitations, expiration terms, and transferability using the machine's serial number.
A confirmed transferable warranty could be especially valuable to a buyer considering a relatively recent model-year skid steer.
Why This Machine Is Being Sold
Unlike equipment being replaced after extensive commercial service, the seller reports that this skid steer simply wasn't needed after it was purchased.
The machine is now being offered at a significantly reduced asking price because the seller wants to complete a sale rather than continue holding the equipment.
The reduction from $48,000 to $42,000 OBO reflects the seller's stated motivation to sell promptly.
Serious buyers are encouraged to contact Trustworthy Equipment LLC with questions or a reasonable offer.
Available in Glenmoore, Pennsylvania — Nationwide Buyers Welcome
This New Holland L320 in Pennsylvania is located in Glenmoore, providing an opportunity for buyers throughout Chester County, southeastern Pennsylvania, and surrounding Mid-Atlantic markets.
Buyers searching for a used New Holland L320 or a low-hour skid steer for sale from outside Pennsylvania are also welcome to inquire.
Nationwide transportation assistance may be available through independent transportation providers.
Financing assistance may be available to qualified buyers through independent financing providers, with approval, rates, terms, and conditions determined by the financing provider.
NOW $42,000 OBO — REDUCED $6,000 — SELLER MOTIVATED!
Contact Trustworthy Equipment LLC today for current availability, additional photographs, warranty information, or to submit a reasonable offer on this 2026 New Holland L320.
Trustworthy Equipment LLC is marketing this unit on behalf of the seller and helps connect qualified buyers with equipment owners. Buyers are encouraged to inspect the equipment and verify specifications, operating condition, and warranty coverage before purchase.