USED 1960 CINCINNATI 18” TRAY TOP WITH GAP

Distance Between Centers: 108.00 / 120.00 in 2743.00 / 3045.00 mm
Swing Over Bed: 20.00 in 508.00 mm
Swing In Gap: 28.00 in 711.20 mm
Swing Over Cross Slide: 12.50 in 317.50 mm
X – Cross Slide Travel: 12.00 in 304.80 mm
Z – Carriage Travel: 108.00 in 2743.20 mm
Chuck Diameter: 10.00, 12.00 in 254.00, 304.80 mm
Chuck Type: Three jaw and four jaw independent
Turret: Four station manual
Spindle Bore: 1.75 in 44.45 mm
Spindle Power: 5.00 hp 3.73 kW
Spindle Speed: 25 – 980 RPM
Spindle Nose: L-1
Tailstock Quill Diameter: 2.25 in 57.15 mm
Tailstock Quill Travel: 5.00 in 127.00 mm
Thread Range: 1-1/2 - 92 TPI (48 Selections)
Feed rate: 0.321” to 0.0019”
Ways: Flame Hardened and Ground
Way Covers: None
Chip Conveyor: None
Coolant: Yes
Power: 3 Phase, 50 – 60 Hz, 200 – 500 Volt, Existing
Additional: Steady rest, full length hydraulic, Scanamatic tracer
Machine Length: 170.00 in 4318.00 mm
Machine Width: 36.00 in 914.40 mm
Machine Height: 60.00 in 1524.00 mm