USED B&K Precision 1710A

ITEM SPECIFICSBrand: B&K PrecisionModel: 1710AType: Analog DC Bench Power SupplyOutput Voltage: 0–30 VDCOutput Current: 0–1 ALow Current Range: 0–0.25 AInput: 115 VAC / 60 HzPower Consumption: Approx. 70 W or less at full loadOperating Modes: Constant Voltage / Constant CurrentDisplay: Dual Analog MetersVoltage Adjustment: Coarse & FineCurrent Adjustment: VariableSafety Category: CAT IICountry/Region of Manufacture: TaiwanCondition: Pre-OwnedTesting: Tested and WorkingMANUFACTURER SPECIFICATIONSDC output voltage: 0–30 VDCHigh current range: 0–1 ALow current range: 0–0.25 AConstant-voltage operationConstant-current operationVoltage regulation, line: 0.01% + 3 mVVoltage regulation, load: 0.01% + 3 mVRecovery time: 100 µs typicalRipple voltage: 3 mV peak-to-peak typical / 1 mV RMSCurrent regulation: 0.2% + 3 mACurrent ripple: 3 mA typicalVoltmeter range: 0–32 VVoltmeter accuracy: ±2.5%Ammeter high range: 0–1.04 AAmmeter low range: 0–0.26 AAmmeter accuracy: ±2.5%Reverse-polarity protectionCurrent limitingOperating temperature: 0°C to +40°CDimensions: Approx. 6.2" H x 5.5" W x 12.5" DWeight: Approx. 8 lb.B&K's manual confirms these specifications for the 1710A.CONDITION DESCRIPTIONPreviously used and obtained from a working professional environment. Unit has been tested and works.Exterior shows cosmetic signs of previous use, including paint splatters, markings, scratches, and general surface wear. These cosmetic issues do not affect operation.Please review all photos closely for the exact cosmetic condition, controls, meters, terminals, and labels.LISTING DESCRIPTIONB&K Precision Model 1710A Analog DC Bench Power Supply, providing adjustable 0–30 VDC output at up to 1 amp.This is a traditional linear laboratory power supply designed for electronics testing, service, education, engineering, prototyping, and general bench use.The 1710A provides both constant-voltage and constant-current operation with separate analog voltage and current meters. Voltage is adjustable using coarse and fine controls, while the current control allows the operator to establish a current limit appropriate for the circuit or device being powered.A selectable high/low current range provides 0–1 A or 0–0.25 A operation, allowing easier meter readings when working at lower currents.B&K designed the 1710A for continuous operation at full rated load, with current limiting, reverse-polarity protection, and low output ripple.This particular unit comes from a working environment and has been tested and confirmed operational.Cosmetically, the exterior has some paint splatters, markings, and other wear from previous use. It is best suited for a buyer who values a reliable working bench supply over pristine cosmetics.Key FeaturesGenuine B&K Precision test equipmentModel 1710A0–30 VDC adjustable outputUp to 1 A output current0–0.25 A low-current rangeConstant-voltage operationConstant-current operationDual analog voltage/current metersCoarse and fine voltage adjustmentAdjustable current limitingLow-ripple linear power supplyReverse-polarity protectionCAT IIMade in TaiwanTested and workingDiscontinued professional bench instrument Shipping Returns Policies Shipping Orders ship within 1 business day of payment, subject to freight scheduling. We do not ship to Alaska, Hawaii, territories, or APO/FPO mailboxes unless prior arrangements are made. Any orders shipped via shipping or freight forwarder are final sale with no returns. Freight All freight damage must be noted on the Bill of Lading (BOL) at the time of delivery. Take clear photos of: The damaged item Packaging The BOL damage notation Retain all original packaging until the claim is resolved. Failure to follow these steps may result in denial of any refund related to shipping damage. International buyers are fully responsible for: Customs clearance Duties and taxes Brokerage fees Buyer must arrange for their own customs broker if required. Seller does not provide customs clearance services. All shipments are FOB origin, title and risk transfer to buyer at shipping point. Returns Anacapa Equipment Brokers, Inc. is committed to excellent customer service. Items are sold as-is with a 30-day Right of Return, unless otherwise stated. Only items shown in the listing photos are included. Buyer may return equipment for any reason within 30 days of receipt, provided it is returned in the same condition as shipped. No returns or refunds will be accepted if the buyer uses a shipping or freight forwarder for international shipment. Store Policies All equipment is sold as-is with no warranty of merchantability or fitness for a particular purpose. Buyer assumes all risk regarding the quality, performance, suitability, and safety of the equipment. Equipment should only be installed and operated by qualified personnel. Seller is not liable for any damages, injuries, or losses, incidental or consequential, related to the use of purchased equipment. Buyer agrees to defend, indemnify, and hold harmless Anacapa Equipment Brokers, Inc., its officers, employees, and agents from all claims, damages, or expenses, including legal fees, arising out of the purchase, ownership, or use of equipment.