USED 2024 DOOSAN MYNX 6500/40

Detailed Specifications

Capacity:

X Axis Travel: 1,270 mm / 50.0"
Y Axis Travel: 670 mm / 26.4"
Z Axis Travel: 625 mm / 24.6"
Table Loading Area: 1,400 mm x 670 mm / 55.0" x 26.4"
Allowable Table Load: 1,300 kg / 2,866 lbs
Table T-Slot Spacing x Width: 5 slots, 125 mm x 18H8 / 4.92" x .71"

12K Spindle:

Spindle Nose to Table Top: 150 mm to 775 mm / 5.9" to 30.5"
Big Plus Spindle System: BT 40 Big Plus
Spindle Speed: 12,000 RPM
AC Spindle Motor: 30 min. rating 15.6 kW / 21 HP
Spindle Torque: 30 min. rating 165.52 Nm / 122 ft-lbs
Spindle Acceleration / Deceleration Time: 0–12K, 4.9 sec / 12K–0, 4.2 sec

Automatic Tool Changer:

Number of Tools: 30
Tool Shank: BT 40
Pull Stud: Supply Company #711-23
Max Tool Diameter Adjacent Pots Empty: 80 mm / 125 mm, 3.15" / 4.9"
Max Tool Length: 300 mm / 11.8"
Max Tool Weight: 8 kg / 17.6 lbs

Motion:

X Axis Rapid Traverse Rate: 30 m/min / 1,181 IPM
Y Axis Rapid Traverse Rate: 30 m/min / 1,181 IPM
Z Axis Rapid Traverse Rate: 24 m/min / 945 IPM
Cutting Feed Rate: 1–12,000 mm/min / .04–472 IPM
Least Command Increment: .001 mm / .0001"
X Axis Feed Thrust Continuous: 2,585 lbs
Y Axis Feed Thrust Continuous: 2,585 lbs
Z Axis Feed Thrust Continuous: 5,370 lbs
Positioning Accuracy X Axis: .021 mm / .00082"
Positioning Accuracy Y Axis: .013 mm / .00051"
Positioning Accuracy Z Axis: .013 mm / .00051"
Repeatability X Axis: .010 mm / .00039"
Repeatability Y Axis: .008 mm / .00031"
Repeatability Z Axis: .008 mm / .00031"

General:

Machine Height: 3,015 mm / 118.7"
Floor Space Required: 2,674 mm x 3,350 mm / 105.3" x 131.9"
Machine Weight: 9,000 kg / 19,850 lbs

Utility:

Power Required: 49 kVA / 140 amps @ 220V
Voltage Required: Fanuc 205–235V, 3 Phase

Tank Capacity:

Coolant Tank Capacity: 380 liters / 100 gallons
Lubrication Tank Capacity: 1.4 liters / .37 gallons
Air Required: 5.4 MPa / 80 PSI, 8.83 CFM