USED WANNER E 45X80

Manufacturer Information
Wanner
Wanner manufactures granulators and industrial size-reduction equipment used in plastics processing, recycling, injection molding, extrusion, and production-scrap recovery applications. Granulators of this type are designed to reduce compatible plastic scrap into smaller material for recycling, reprocessing, handling, or disposal.
This Wanner Type E 45x80 was manufactured in 2008 and combines a 450 mm diameter x 800 mm wide cutting section, 40 HP drive, up to 450 RPM operating speed, and soundproof enclosure.
Description
Available for sale is a used Wanner Granulator, Type E 45x80, manufactured in 2008.
The granulator features an approximately 450 mm (17.7") diameter x 800 mm (31.5") wide cutting section and operates at a stated maximum speed of 450 RPM.
Power is provided by a 30 kW (40 HP) belt-driven motor designed for 400V, 50 Hz, 3-phase electrical service.
The Wanner E 45x80 has a stated maximum processing capacity of approximately 800 kg/hr (1,760 lb/hr), depending on the product and operating conditions.
This unit is installed within a soundproofed enclosure, which can help reduce operating noise in plastics processing and recycling environments.
Overall dimensions are approximately 1,000 mm x 2,250 mm x 2,100 mm high (39.4" x 88.6" x 82.7" high). Empty weight is approximately 2 metric tonnes (4,409 lb).
Specifications

Specification
Details

Manufacturer
Wanner

Type / Model
E 45x80

Equipment Type
Industrial Granulator

Cutting / Rotor Diameter
450 mm / 17.7"

Cutting Width
800 mm / 31.5"

Maximum Operating Speed
450 RPM

Motor
30 kW / 40 HP

Drive Type
Belt Drive

Maximum Capacity
800 kg/hr / 1,760 lb/hr

Electrical
400V / 50 Hz / 3 Phase

Enclosure
Soundproofed

Dimensions
1,000 x 2,250 x 2,100 mm H

Approx. Imperial Dimensions
39.4" x 88.6" x 82.7" H

Empty Weight
Approx. 2 Metric Tonnes / 4,409 lb

Year Built
2008

Condition
Used

Typical Applications

Plastics recycling
Industrial size reduction
Injection molding scrap recovery
Extrusion scrap processing
Production waste reduction
Runner and sprue granulation
Regrind production
Plastic component granulation
Manufacturing scrap recovery
In-house material recycling
Polymer processing
Production reject reduction

Products & Materials This Granulator Could Be Used For

Injection molded plastic parts
Plastic runners
Sprues
Plastic production rejects
Extrusion scrap
Plastic profiles
Thermoplastic components
Plastic containers
Polymer scrap
Plastic sheets and offcuts
Compatible rigid plastic waste
Other materials suitable for granulation

Actual capacity and suitability depend on material type, dimensions, density, toughness, feed rate, knife condition, screen configuration, and required finished particle size.
Frequently Asked Questions

What is the maximum capacity of this Wanner granulator? The stated maximum capacity is approximately 800 kg/hr (1,760 lb/hr), depending on the material and operating conditions.

How much horsepower does the E 45x80 have? It is powered by a 30 kW (40 HP) belt-driven motor.

What is the maximum operating speed? The machine has a stated maximum operating speed of 450 RPM.

Does this granulator include noise reduction? Yes. The machine is installed in a soundproofed enclosure designed to help reduce operating noise.

What electrical service is required? The motor is specified for 400V, 50 Hz, 3-phase power. Electrical compatibility should be confirmed before installation, particularly at facilities using 60 Hz service.

Can Aaron Equipment assist with shipping and logistics? Yes. Aaron Equipment can assist with loading coordination, domestic and international freight, customs documentation, and logistics planning. With an empty weight of approximately 2 metric tonnes, appropriate lifting and freight arrangements can be coordinated.