USED WANNER E 45X80

Manufacturer Information
Wanner
Wanner manufactures industrial granulators and size-reduction equipment commonly used in plastics processing, recycling, injection molding, extrusion, and material-recovery operations. Granulators are used to convert compatible production scrap and plastic components into smaller, reusable or more easily handled material.
This 2015 Wanner Type E 45x80 features a 450 mm diameter x 800 mm wide cutting section, 40 HP (30 kW) drive, maximum 450 RPM operating speed, and soundproof enclosure.
Description
Available for sale is a used Wanner Granulator, Type E 45x80, manufactured in 2015.
The machine features an approximately 450 mm diameter x 800 mm wide cutting section and has a stated maximum operating speed of 450 RPM.
Power is supplied by a 30 kW (40 HP) belt-driven motor rated for 400V, 50 Hz, 3-phase electrical service.
The Wanner E 45x80 has a stated maximum processing capacity of approximately 800 kg/hr (1,760 lb/hr), depending on the product, feed characteristics, screen and knife configuration, and operating conditions.
The granulator is installed inside a soundproof enclosure, helping control operating noise in industrial production and recycling environments.
Overall dimensions are approximately 1,000 mm x 2,250 mm x 2,100 mm high (39.4" x 88.6" x 82.7" high). Empty weight is approximately 2 metric tonnes (4,409 lb).
Specifications

Specification
Details

Manufacturer
Wanner

Type / Model
E 45x80

Equipment Type
Industrial Granulator

Cutting / Rotor Diameter
450 mm / 17.7"

Cutting Width
800 mm / 31.5"

Maximum Operating Speed
450 RPM

Motor
30 kW / 40 HP

Drive
Belt Drive

Maximum Capacity
800 kg/hr / 1,760 lb/hr

Electrical
400V / 50 Hz / 3 Phase

Enclosure
Soundproofed

Dimensions
1,000 x 2,250 x 2,100 mm H

Approx. Imperial Dimensions
39.4" x 88.6" x 82.7" H

Empty Weight
Approx. 2 Metric Tonnes / 4,409 lb

Year
2015

Condition
Used

Typical Applications

Plastic recycling
Industrial size reduction
Injection molding scrap recovery
Extrusion scrap processing
Production waste reduction
Runner and sprue granulation
Plastic part granulation
Regrind production
In-house scrap recycling
Polymer processing
Manufacturing waste recovery
Material reclamation

Products & Materials This Granulator Could Be Used For

Injection molded plastic parts
Runners and sprues
Plastic production rejects
Extrusion scrap
Plastic profiles
Thermoplastic components
Plastic containers
Polymer scrap
Plastic sheets
Manufacturing offcuts
Compatible rigid plastic waste
Other materials suitable for granulation

Actual throughput and suitability depend on material composition, dimensions, density, toughness, feed method, knife condition, screen size, and required finished particle size.
Frequently Asked Questions

What is the maximum capacity of this Wanner E 45x80? The stated maximum capacity is approximately 800 kg/hr (1,760 lb/hr), depending on the product and operating conditions.

What size motor powers the granulator? The machine uses a 30 kW (40 HP) belt-driven motor.

What is the maximum operating speed? The granulator has a stated maximum operating speed of 450 RPM.

Does the granulator have a sound enclosure? Yes. This machine is housed in a soundproofed box/enclosure to help reduce operating noise.

What electrical power does it require? The motor is specified for 400V, 50 Hz, 3-phase power. Electrical compatibility should be evaluated before operating the machine on a different voltage or frequency.

Can Aaron Equipment assist with shipping and logistics? Yes. Aaron Equipment can assist with loading coordination, domestic and international freight, customs documentation, and logistics planning. The machine weighs approximately 2 metric tonnes, so appropriate lifting and freight arrangements should be considered.