USED TPS CEO-916-4

TPS Lunaire CEO-916-4-B-F4T Temperature Humidity Stability Chamber 208V 1PH This chamber is designed for controlled environmental testing, stability testing, conditioning, research, QA/QC, product testing, and lab/industrial applications. The unit is labeled for 208V, 1 Phase, 60Hz power and uses R-134a refrigerant. Temperature range is listed as 32°F to 210°C per equipment label. Chamber is configured with the maximum of 8 Stainless steel shelves and a set of interior see-through doors for additional climate control and storage.Temperature reading was compared at the center of the chamber against a Traceable thermocouple thermometer. At the 10°C test point, chamber screen read 10.0°C and the thermocouple read 9.4°C, for a 0.6°C difference. At the ambient test point, chamber screen read 25.4°C and the thermocouple read 26.0°C, also a 0.6°C difference. These were basic center-point comparison checks only. Full calibration, full temperature range, and chamber uniformity were not verified.Cooling/refrigeration was tested with humidity off. The chamber reached both 15°C and 10°C setpoints in approximately 7 minutes and held each target for approximately 20 minutes. Basic heat/ramp function was also tested to 30°C, with the PV tracking the ramping CSP. Machine ran for approximately 3 hours during testing without error. The chamber is outfitted with a removable top vent hood. Humidity controls, water inlet, pressure control knob, steam generator drain, and chamber drain were identified. Rear deionizer cartridge mount is present; deionizer cartridge is missing and not included. Humidity generation was not fully tested.Specifications Manufacturer: TPS / LunaireModel: CEO-916-4-B-F4TType: Temperature / Humidity Stability Test ChamberController: Watlow F4T touchscreen controllerTemperature Range: 32°F to 210°C, per labelPower: 208V, 1 Phase, 60HzRefrigerant: R-134aEnclosure Type: Type 1Chamber Style: Environmental / stability test chamberShelving: Includes 8 Stainless steel shelves with 2 magnetic see-through interior doors Top Vent Hood: Fantech FR 150 #411334 Inline duct fan with metal hood attached Testing Status: Basic power, controller, fan, heat ramp, and refrigeration tests performedHumidity Function: Not yet fully tested at time of listing notes Dimensions W:46" D:36" H:66" (H:96" with Humidifier Hood)Comes from a professional working environment. Unit was acquired from an active laboratory and has been partially tested with 208V single-phase power. The chamber powers on, touchscreen/controller boots, and fan/blower runs quietly with a consistent hum. Heat/ramp function was tested and working. All displays respond and the machine responds swiftly to new inputs and commands. Minor exterior cosmetic damages. Overall in great condition. See pictures. See description for full specs. Shipping Returns Policies Shipping Orders ship within 1 business day of payment, subject to freight scheduling. We do not ship to Alaska, Hawaii, territories, or APO/FPO mailboxes unless prior arrangements are made. Any orders shipped via shipping or freight forwarder are final sale with no returns. Freight All freight damage must be noted on the Bill of Lading (BOL) at the time of delivery. Take clear photos of: The damaged item Packaging The BOL damage notation Retain all original packaging until the claim is resolved. Failure to follow these steps may result in denial of any refund related to shipping damage. International buyers are fully responsible for: Customs clearance Duties and taxes Brokerage fees Buyer must arrange for their own customs broker if required. Seller does not provide customs clearance services. All shipments are FOB origin, title and risk transfer to buyer at shipping point. Returns Anacapa Equipment Brokers, Inc. is committed to excellent customer service. Items are sold as-is with a 30-day Right of Return, unless otherwise stated. Only items shown in the listing photos are included. Buyer may return equipment for any reason within 30 days of receipt, provided it is returned in the same condition as shipped. No returns or refunds will be accepted if the buyer uses a shipping or freight forwarder for international shipment. Store Policies All equipment is sold as-is with no warranty of merchantability or fitness for a particular purpose. Buyer assumes all risk regarding the quality, performance, suitability, and safety of the equipment. Equipment should only be installed and operated by qualified personnel. Seller is not liable for any damages, injuries, or losses, incidental or consequential, related to the use of purchased equipment. Buyer agrees to defend, indemnify, and hold harmless Anacapa Equipment Brokers, Inc., its officers, employees, and agents from all claims, damages, or expenses, including legal fees, arising out of the purchase, ownership, or use of equipment.