Explore precision with the new Clausing 500EVS08 Knee Mill. Featuring electronic variable speed control, 5hp motor, and a robust 11"x58" table. Benefit from hardened surfaces, advanced quill movement, and exceptional durability for your vertical milling needs.
| Table-W | 11" | 279.4 mm |
| Table-L | 58" | 1,473.2 mm |
| Travel-Long | 38.2" | 970.28 mm |
| Travel-Cross | 16" | 406.4 mm |
| Power | 5 hp | 3.7 kW |
| RPM | 5,000 RPM | 5,000 RPM |
| Taper | R8 | R8 |
| Dimensions | 110" x 82.7" x 90.6" | 110" x 82.7" x 90.6" |
| Weight | 3,300Lbs | 3,300Lbs |
Machine Style..........Knee Mill
Spindle Speed Control..........Electronic Variable Speed
Spindle (Hp)..........5
Total Amp Draw @208V 3Ph..........17
Total Amp Draw @230V 3PH..........16
Total Amp Draw @460V 3Ph..........8
Table Size (inch)..........11 x 58
Number T-Slots..........3
T-Slot Width (inch)...........63
T-Slot Center Distance (inch)..........2.48
Table Way Design..........Dovetail
Cross Feed Way Design..........Square
Knee Way Design..........Square
X Longitudinal Travel Manual (inch)..........38.2
Y Cross Travel Manual (inch)..........16
Knee Travel Manual (inch)..........17.7
Ram Travel Manual (inch)..........22
Variable Spindle Speed (rpm)..........50 – 5000
Variable Spindle Speed Low Range (rpm)..........50 – 500
Variable Spindle Speed High Range (rpm)..........500 – 5000
Spindle Taper..........R8
Spindle quill Travel (inch)..........5
Quill Feed (in/rev)..........(.00157/.00315/.006)
Quill Diameter (inch)..........3.28
Column Turret Diameter (inch)..........15.75
Knee Width (inch)..........15.35
Column Bearing Length (inch)..........17.72
Saddle/Table Bearing Length (inch)..........25.59
Ram/Turret Bearing Length (inch)..........17.72
Ram Length (inch)..........32.75
Table Load (lbs.)..........1,108
Machine Weight (lbs.)..........3,300
Voltage Required..........230/460
Phase..........3
Machine Foot Print (LxWxH) (inch)..........110 x 82.7 x 90.6
Shipping Weight (lbs.)..........3,700
Machine Features:
• Electronic variable speed with inverter drive
• 11” X 58” Table surface
• Meehanite Castings for superior rigidity and wear resistance
• Hardened and Ground X,Y,&Z ways
• X/Y ways coated with Turcite B for excellent wear resistance
• Column and Knee way covers
• Ground T-slots to provide reference edge for workpiece positioning
• Hardened and ground table surface, and spindle
• Chromed and ground quill
• Hardened and ground X and Y axis leadscrews with Nickel Phosphorous treatment and double nuts for easy backlash adjustments
• ABEC7/CP4 Spindle bearings
• Coolant System w/pump and switch
• Articulating head for compound angles 90 degree left and right 45 degree up and down by worm gear
• Lever operated manual rapid quill movement
• Hand wheel for fine quill feed
• Adjustable automatic feed disengagement for quill feed
• Micrometer depth stop for quill
• Reversing switch for clockwise or counter clockwise operation of spindle
• Hand operated spindle brake with auto power off
• One shot way lube system
• A one year warranty backed by Clausing Service Center dedicated to support our customers with parts and service
