USED 2004 DMG MORI GILDEMEISTER GMX 400 LINEAR

Status: Available
Number of axis: 5-Axis
Tool changer: 60 ATC
Control: SIEMENS 840D
Spindle: 12,000 rpm
Spindle taper: HSK-A63
B axis: +/- 120 degrees
Spindle number: 2
Turret number: 1
Spindle 1: 4,000 rpm
Turret 1: 12 Position
Spindle 2: 4,000 rpm
Taper type: VDI 40
Swing diameter: 25.2"
Max. turning diameter: 25.2"
Turning length: 62.4"
Drive power (100%/40% dc): 60.3 hp
Max. speed (40% dc): 4,000 rpm
Torque (40% dc): 553.2 lb/ft
Torque c-axis: 442.5 lb/ft
Chuck diameter: 7.9-15.7"
Chuck currently on main spindle: SCHUNK ROTA THW plus 315-104
Max. bar diameter: 3.5"
Rapid traverse speed x/y/z: 1,574/945/2,755 ipm
Linear drive z1: 1FN3900-3WB00
Slide travel x1/y1 (synchronous drive): 21.7"/+/-4.3"
Measuring systems: absolute direct
Tool mount: HSK63-A
Max. spindle speed: 12,000 rpm
Max. drive power (40% dc): 29.5 hp
Max. torque (40% dc): 553.2 lb/ft
Indexing of spindle axis: 1 Degrees
Swivel travel b1 (synchronous drive): Plus or minus 120 degrees
Resolution: 0.001 Degrees
Hydraulic clamping (at 435 psi): 1,475 lb/ft
Number of tool stations: Shelf 60
Length/max. number: 7.9/1.5-13.8/29.5
Tool weight, g1/g2: 6/10 lbs
Tool diameter, max. with pocket empty: 80-140"
Tool exchange time g1/g2: 1.3/2.6 s
Type of tool exchange: covered
Average chip-to-chip time: 8 s
Volume: 264.2 gal.
Belt filter/filter fineness: 40 um
Pres. pump 1/pump 2/pump 3 with cool. device: 8/20/80 bar
Shaft diameter according to vdi/din 69880: 1.6"
Max. power (40% dc): 15.7 hp
Rapid traverse speed x/z: 945/1,574 ipm
Slide travel x2/z2 (synchronous drive): 225/1,400"
Max. speed: 4,000 rpm
Rapid traverse speed z: 1,417 ipm
Feed power, s6-40% dc: 13 kN
Slide travel z3 (synchronous drive): 59.1"
Setup dimensions, l/h/b: 366.1"/181.1"/120.1"
Gross weight including cnc: 44,000 lbs.
Processor interface: Pentium III 1,2 GHz
Screen: 15"-TFT Screen