USED 2019 JOHN DEERE 959 M

2019 John Deere 959M tracked feller buncher, maintenance on drive motors done every 250 hrs, and rotated every 500hrs, 246 kW (330 hp) engine, 1392 Nm (1027 lb-ft) engine torque,Engine, Model: John Deere PowerTech Plus 6090PSS,Output: 246 kW (330 hp) @ 1900 rpm,Torque: 1392 Nm (1027 lb-ft),Rated Speed: 1900 rpm 29 ft 1 in (8.88 m) maximum boom reach, 10 ft 5 in tail swing, superstructure width of 3.2 meters (10 ft 6 in) and a track gauge of 2.72 meters (8 ft 11 in), Track Rollers (Each Side), 9Carrier Rollers (Each Side), Superstructure Width: 3200 mm (10 ft 6 in), Track Gauge: 2720 mm (8 ft 11 in), Base Carrier Length: 4.9 m (16 ft 1 in), Overall Width: 3330 mm (10 ft 11 in),Track Length on Ground: 3810 mm (12 ft 6 in),Tailswing Radius: 3180 mm (10 ft 5 in),Ground Clearance: 747 mm (29 in),Fuel Tank: 285.4 gallons Cab Leveling Tilt (Forward): 26 degrees,Cab Leveling Tilt (Rear): 14 degrees, Travel Speed: 2.3 mph,Lift Capacity at Max Reach: 17,570.9 lbs, Cutting Swath: Up to 13.2 ft weight 83,260lbs Quadco 27B Height 2,972 mm 117" Width 1,778 mm 70", Depth 1,880 mm 74", Maximum Throat Opening 1,466 mm 57.7",Maximum Throat, Opening @ Teeth 1,118 mm 44", Accumulation Area 0.58 m2 6.2 ft2, Weight with XT Rotate 4,100 kg 9,040 lbs, Cutting Capacity 686 mm 27", Tip-to-Tip Diameter 1,651 mm 65",Rated Saw Speed 1,000 rpm, Number of Teeth 18, Saw Kerf 59 mm 2 5/16"
Style One Piece,Cylinders (Diameter) 3",Grab Arms 2 Cylinders, Accumulating Arms 2 Cylinders