USED IVEK DigiSpense 3020

ITEM SPECIFICSBrand: IVEKProduct Line: DigiSpenseModel: DigiSpense 3020Manufacturer Part Number: 520219-AAAAAType: Precision Liquid Dispensing ControllerConfiguration: Single-Channel Linear Flow ControllerCompatible Actuators: IVEK 20-Pitch and 40-Pitch Linear Actuator ModulesCompatible Pump Types: Select IVEK Positive-Displacement Ceramic Pump ModulesMotor Output: 44 VDC at 3AMaximum Motor Speed: 1,200 RPMOperating Modes: Prime, Dispense and MeterAdditional Modes: Dispense MCV, Dispense Multichamber and Meter MultichamberVolume Resolution: As low as 0.01% of pump chamber volume, depending on pump and actuator configurationRecipe Storage: Up to 32 dispensing parameter recipesLogic Interface: Contact Closure Trigger and Optically Isolated Logic I/OLogic Input: 24 VDCParameter Interface: RS232 SerialAuxiliary Output: 48 VDC maximum at 250mAFront Panel: Membrane Switch KeypadDisplay: LCD with LED BacklightInput Power: 100–240 VAC, 50/60 Hz, 4ALine Cord Configuration: North AmericanCertification: CEIntended Use: Precision Liquid Dispensing, Dosing and MeteringMPN: 520219-AAAAACONDITION DESCRIPTIONPre-owned condition. This IVEK DigiSpense 3020 controller comes from a working professional environment and has light cosmetic marks from normal prior use and handling.The controller has not been tested with a compatible linear actuator, ceramic pump module or complete dispensing system. Please review all photographs for the exact cosmetic condition, connections and configuration.DESCRIPTIONIVEK DigiSpense 3020 precision liquid dispensing controller, model 520219-AAAAA.The DigiSpense 3020 is a low-volume, linear-flow, single-channel controller designed for use with compatible IVEK linear actuator and positive-displacement ceramic pump modules. It provides electronically programmed dispensing volumes without requiring mechanical volume calibration.The controller supports fixed-volume dispensing, continuous metering and fluid-system priming. Programmable operating parameters include dispense volume, dispense and load rates, forward or reverse operation, acceleration, load threshold and drawback control.The RS232 serial interface, contact-closure trigger and optically isolated 24 VDC logic interface allow the controller to be used as a benchtop dispensing controller or incorporated into an automated production system.This unit comes from a working professional environment and shows light cosmetic marks consistent with normal use.Key FeaturesLow-volume precision liquid dispensing controllerSingle-channel linear-flow operationProgrammable electronic volume selectionDispense, meter and prime operating modesMinimum-chamber-volume and multichamber functionsUp to 32 stored dispensing recipesProgrammable fluid drawbackAdjustable dispense, load and prime ratesForward and reverse fluid movementContact-closure trigger inputOptically isolated 24 VDC logic interfaceRS232 serial communicationMembrane keypad with backlit LCDAutomatic 100–240 VAC line-voltage selectionSuitable for benchtop or automated system integration Shipping Returns Policies Shipping Orders ship within 1 business day of payment, subject to freight scheduling. We do not ship to Alaska, Hawaii, territories, or APO/FPO mailboxes unless prior arrangements are made. Any orders shipped via shipping or freight forwarder are final sale with no returns. Freight All freight damage must be noted on the Bill of Lading (BOL) at the time of delivery. Take clear photos of: The damaged item Packaging The BOL damage notation Retain all original packaging until the claim is resolved. Failure to follow these steps may result in denial of any refund related to shipping damage. International buyers are fully responsible for: Customs clearance Duties and taxes Brokerage fees Buyer must arrange for their own customs broker if required. Seller does not provide customs clearance services. All shipments are FOB origin, title and risk transfer to buyer at shipping point. Returns Anacapa Equipment Brokers, Inc. is committed to excellent customer service. Items are sold as-is with a 30-day Right of Return, unless otherwise stated. Only items shown in the listing photos are included. Buyer may return equipment for any reason within 30 days of receipt, provided it is returned in the same condition as shipped. No returns or refunds will be accepted if the buyer uses a shipping or freight forwarder for international shipment. Store Policies All equipment is sold as-is with no warranty of merchantability or fitness for a particular purpose. Buyer assumes all risk regarding the quality, performance, suitability, and safety of the equipment. Equipment should only be installed and operated by qualified personnel. Seller is not liable for any damages, injuries, or losses, incidental or consequential, related to the use of purchased equipment. Buyer agrees to defend, indemnify, and hold harmless Anacapa Equipment Brokers, Inc., its officers, employees, and agents from all claims, damages, or expenses, including legal fees, arising out of the purchase, ownership, or use of equipment.