Baumalight DXA530 Rotating Excavator Tree Saw, 30-Inch Blade, 10-45 GPM, 10-Inch Cut

The Baumalight DXA530 is an excavator-mounted tree saw with a 30-inch blade, 180-degree hydraulic rotation, and a maximum cut of 10 inches. Its bent-axis piston motor is matched to 10-45 GPM auxiliary hydraulic flow, and the bolt-on adaptor system allows the mount to be built for the excavator.
DXA530 Cutting and Rotation
A helical actuator rotates the head through 180 degrees for horizontal cutting, vertical trimming, and angled work. The blade is supported by an overhung load adaptor with tapered roller bearings. A blade shield directs chips, and replaceable H3000 carbide teeth provide serviceable cutting edges for land clearing, fence-line work, trimming, and limbing.
Baumalight DXA530 Specifications
Excavator Fitment
Confirm excavator operating weight, auxiliary flow and pressure, case-drain plumbing, electrical controls where required, coupler dimensions, pin size, pin spacing, stick width, and hydraulic hose length. Hoses and couplers are not supplied with these excavator models.
What size excavator is recommended for the DXA530?
Baumalight lists a 4- to 12-ton carrier range.
What hydraulic flow does it require?
The DXA530 is listed for 10-45 GPM and pressure up to 5,000 PSI, with a required case drain.
Is an excavator mount included?
The saw uses a bolt-on adaptor system. The mount must be matched to the excavator's coupler and pin dimensions.