Baumalight S24 Stump Grinder, Skid Steer Mount, 24″ Rotor, 34 Teeth, Hydraulic Swing

The Baumalight S24 is a hydraulic-swing skid steer stump grinder with a 24-inch rotor and 34 S1000 planer teeth. Its 60-degree swing arc moves the cutting wheel across the stump without repositioning the skid steer.
Hydraulic Swing Stump Grinder
The S24 cuts up to 10 inches below grade, up to 6 inches deep per pass, and across a 22-inch horizontal cut. A 12V control connection operates the swing function.
Twenty-four-inch rotor with 34 S1000 planer teeth
Sixty-degree hydraulic swing arc
Quick-attach skid steer mount
Motor options matched to carrier hydraulic output
S24 Specifications
S24 Fitment
Confirm skid steer make and model, auxiliary flow and pressure, quick-attach mount, couplers, electrical connector, and hydraulic motor. The S24 requires a 12V connection with at least 10 amps for its swing controls.
How deep does the S24 cut?
Baumalight specifies 10 inches below ground, with a maximum cutting depth of 6 inches per pass.
Does the S24 require 12V power?
Yes. The S24 requires a 12V connection with at least 10 amps.
Are hydraulic couplers included?
No. Couplers are not supplied and need to match the skid steer.