USED 2008 OKUMA MULTUS B200-W

2008 Okuma MULTUS B200-W Multitasking CNC Mill-Turn Center

Available under power. This opposing-subspindle MULTUS B200-W is equipped with an Okuma OSP-P200L control, LNS Quick Six S2 bar feeder, high-pressure coolant equipment, upgraded control features, workholding, and an included tooling package. Power-on inspection is available by appointment.

Manufacturer: Okuma
Model: MULTUS B200-W
Year: 2008
Control: Okuma OSP-P200L
Condition: Installed and under power
-
SPECIFICATIONS

Machine Type: B-axis multitasking CNC mill-turn center with opposing subspindle
Maximum Turning Diameter: 23.62 in. / 600 mm
Distance Between Spindles: 29.53 in. / 750 mm
X-Axis Travel: 19.69 in. / 500 mm
Z-Axis Travel: 31.50 in. / 800 mm
Y-Axis Travel: 6.30 in. / 160 mm
W-Axis Travel: 31.89 in. / 810 mm
B-Axis Range: 225 degrees
B-Axis Minimum Increment: 0.001 degree
C-Axis: Full-contouring main and subspindle C-axes
Main Spindle Speed: Up to 6,000 RPM
Milling Spindle Speed: Up to 12,000 RPM
Chuck: 8 in. main chuck; opposing subspindle configuration
Automatic Tool Changer: 40-position
Electrical: 220/480V, 3-phase, 60 Hz, 35.5 kVA
-
EQUIPPED WITH

LNS Quick Six S2 bar feeder with guide tube sleeve for 1.75 in. bar
Hinge-type chip conveyor with high filter
ChipBlaster JV10 high-pressure coolant system
MistBlaster mist collection system
Big-bore spindle package with cylinder, drawtube and 8 in. chuck
MicroCentric quick-change chuck, fixtures, smooth-bore collet and master collet
Sandvik tooling package
Touchsetter and parts catcher for subspindle
Through-spindle air blow for main and subspindle
Turret air blow
Synchronized tapping and off-center turning functions
Lathe tool index function, no-load monitor and automatic power shutoff
3D Virtual Monitor
OSP-P200L 1 GB memory upgrade, API / Lathe SDK and spare M-codes
-
CONTROL-DISPLAYED HOURS

Power-On Time: 6,147:03:44
NC Running Time: 2,949:04:39
Spindle Revolution Time: 1,048:22:48
Cutting Time: 1,379:11:51
-
Machine is installed, under power and available for a power-on inspection by appointment. Additional photos and under-power videos are available upon request.

All specifications, hours and included equipment are subject to buyer verification.
-
Disclaimer
Preliminary specifications are provided for general guidance only and may change without notice. They are believed to be accurate but are not guaranteed. All specifications, dimensions, capacities, weights, and performance figures should be independently verified by the buyer prior to purchase or use. Bridgeline Machinery Corp. makes no representations or warranties, express or implied, regarding the completeness, accuracy, or suitability of any machine specifications, and shall not be liable for any errors or omissions.