USED 2000 DURMA HKM 2508

2000 DURMA HKM 2508 Hydraulic Power Notcher #8344 #1

Cutting Capacities
Cutting Angle: 90° fixed configuration
Max Cutting Length: 250 mm x 250 mm (9.84" x 9.84")
Max Material Thickness (Mild Steel): 8 mm (0.315")
Max Material Thickness (Stainless Steel): 4 mm to 5 mm (0.157" to 0.196") (Note: Stainless capacity is typically reduced by roughly 40-50% due to the material's higher tensile strength)

Hydraulic & Electrical Systems
Motor Power: 4 kW (5.4 HP)
Maximum Pressure: 210 bar (3045 PSI)
Stroke Rate: Approximately 30 to 35 strokes per minute
Stroke Length: 40 mm (1.57")
Oil Tank Capacity: 50 Liters (13.2 Gallons)
Standard Power Supply: 3-Phase / 400V / 50Hz (or regional equivalents like 460V / 60Hz)

Physical Dimensions & Footprint
Table Size: Roughly 900 mm x 700 mm (35.4" x 27.5")
Machine Length: 1,150 mm (45.3")
Machine Width: 950 mm (37.4")
Machine Height: 1,250 mm (49.2")
Total Machine Weight: Approximately 980 kg (2,160 lbs)