NEW Vishay VTF1137 VTF1137-0509

This item is a Vishay Res Thin Film NET 100K Ohm 0.1% 0.5W(1/2W) ±10ppm/°C ISOL Conformal Coated 8-Pin SIP Pin Thru-Hole. This item is a fixed resistor for a resistor network or array. See specifications for full description. Vishay VTF1137 NET 100K Ohm 0.1% 0.5W(1/2W) ±10ppm/°C ISOL Coated 8-pin (5437)New, old stock. All items are in electrostatic sealed packaging. See pictures for more detail. Manufacturer: Vishay Model #: VTF1137 Model: Thin Film Description: This item is a Vishay Res Thin Film NET 100K Ohm 0.1% 0.5W(1/2W) ±10ppm/°C ISOL Conformal Coated 8-Pin SIP Pin Thru-Hole. This item is a fixed resistor for a resistor network or array. See specifications for full description. Specifications: -Lifecycle Active -EU RoHS No -EU RoHS Version 2011/65/EU -Description Res Thin Film NET 100K Ohm 0.1% 0.5W(1/2W) ±10ppm/°C ISOL Conformal Coated 8-Pin SIP Pin Thru-Hole -Taxonomy Resistors » Fixed Resistors » Resistor Networks and Arrays -Introduction Date Feb 11, 2007 -ECCN EAR99 -Supplier Cage Code 18612 -Minimum Storage Temperature -55°C -Number of Resistors 4 -Power Rating per Resistor 0.1 (1/10)W -Maximum Storage Temperature 125°C -Package Type SIP -Operating Temperature 0 to 70°C -Resistance Value 100KOhm -Power Rating 0.5 (1/2)W -Tolerance 0.1% -Temperature Coefficient ±10ppm/°C -Technology Thin Film -Type Network -Maximum Operating Temperature 70°C -Maximum Voltage Rating 100V -Termination Style Pin -Circuit Designator ISOL -Case Style Conformal Coated -Package Shape Single Line -Mounting Through Hole -Package/Case SIP -Number of Terminals 8 -Terminal Pitch (mm) 2.54 -Product Length (mm) 20.83 -Product Depth (mm) 2.54 -Product Height (mm) 7.11 -Lead Finish(Plating) SnPb -Under Plating Material Ni -Terminal Base Material Cu Sold as is with 30 day Right of Return, only pictured items included Easy return/refund for any reason Anacapa Equipment RETURNS Anacapa Equipment strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items must be received in the same condition as sent. We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID. SHIPPING All equipment purchased is shipped within one (1) day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID. LIMITED WARRANTY Buyer acknowledges that the equipment is being sold “as is” and without any warranty of merchantability or fitness for a particular use. Buyer may inspect the equipment prior to purchase and placement of the order prior to inspection is deemed a waiver of Buyer’s right to inspect. Buyer is responsible for determining the suitability of this product for its application. Anacapa Equipment Brokers, Inc. assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased. The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty. DISCLAIMER This equipment is not intended to be used, and should not be used in human experimentation, nor should this instrument be applied to humans in any way. Images sell!Get Supersized Images & Free Image HostingUNLESS NOTED ALL ITEMS SOLD ARE IN USED CONDITION!LIMITED WARRANTY Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased. The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty.INDEMNITY Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California. Track Page Views WithAuctiva's FREE Counter