USED Myers 6-IE-5-S-BD2012-S-Z

ITEM SPECIFICSManufacturer: Myers Power Products / Myers EPSProduct Line: Illuminator IEModel: 6-IE-5-S-BD2012-S-ZSeries: IEAdditional Model / Configuration: IE-1500RPDPType: Central Emergency Lighting Inverter SystemRated Capacity: 5.0 kVARated Output: 5,000 WattsInput Voltage: 277 VACInput Current: 23 AInput Phase: Single PhaseOutput Voltage: 277 VACOutput Current: 18 AOutput Phase: Single PhaseBattery Voltage: 144 VDCEmergency Runtime: 90 Minutes, when equipped with serviceable batteriesBatteries Included: 12Battery Model: Myers BAT-CG12105EBattery Type: AGM VRLAIndividual Battery Rating: 12 V / 105 AhIndividual Battery Weight: Approx. 69 lbOutput Breakers: 20 A, Qty. 12Output Configuration: Normally OnAlarm / Monitoring: Summary Fault Form C ContactsMounting: SeismicCondition: For Parts / Not WorkingTesting: Unable to TestSYSTEM SPECIFICATIONS5.0 kVA / 5,000 W central inverter277 VAC input277 VAC outputSingle-phase configuration144 VDC nominal battery systemDesigned for approximately 90-minute emergency-lighting runtime when installed with a healthy battery bankNormally-on outputTwelve 20 A output circuit breakersSummary fault Form C contactsSeismic mounting configurationDesigned for emergency and life-safety lighting applicationsThe current Myers Illuminator IE platform is designed as a central emergency-lighting inverter and supports LED and other compatible non-HID lighting loads. Current systems include automatic testing/data logging, programmable controls, input circuit protection and RS-232 communications, although specific installed features should be verified from this unit's own configuration and labels.BATTERY SPECIFICATIONSThis system includes 12 Myers BAT-CG12105E batteries.Manufacturer specifications for each battery include:12 V105 AhAGM / absorbed glass mat constructionValve-regulated lead-acid designFront-access terminals1/4"-20 stud terminalsDesigned for deep-cycle UPS and emergency-lighting applicationsApprox. dimensions per battery: 20.13" L x 4.33" W x 9.38" HApprox. weight per battery: 69 lbThe twelve batteries therefore account for approximately 828 lb of system shipping weight.CONDITION DESCRIPTIONFOR PARTS / NOT WORKING — UNABLE TO TEST.This Myers Illuminator IE inverter system has some shipping damage to the exterior cabinet, as pictured.The system could not be powered and fully tested at our facility, so its current operating condition is unknown and it is being sold for parts, repair, refurbishment, or system rebuilding.The included 12 Myers BAT-CG12105E batteries are untested. Due to their age and unknown condition, buyers should assume that battery replacement may be necessary.The cabinet may show dents, bends, scratches, marks, finish wear, and other cosmetic damage from transport and previous handling.Please review all photos closely for the exact cabinet damage, configuration, wiring, breakers, batteries, and included components.LISTING DESCRIPTIONMyers Power Products Illuminator IE Central Emergency Lighting Inverter System, Model 6-IE-5-S-BD2012-S-Z, rated at 5.0 kVA / 5,000 watts.This is a large commercial emergency-power system designed to provide backup power to emergency and life-safety lighting circuits during loss of normal utility power.The system is configured for:277 VAC, 23 A, single-phase input277 VAC, 18 A, single-phase output5,000 W / 5.0 kVA rated capacity144 VDC battery bus90-minute emergency runtime when equipped with serviceable batteriesThe cabinet includes twelve 20 A output breakers, normally-on output configuration, summary fault Form C contacts, and seismic mounting.This system includes 12 Myers BAT-CG12105E 12V 105Ah AGM VRLA batteries.IMPORTANT BATTERY / SHIPPING OPTIONThe batteries are untested and should be considered candidates for replacement.For buyers planning a refurbishment, installing a fresh set of batteries provides a clean starting point rather than relying on an older battery bank of unknown remaining capacity.We can ship the system in either of two ways:1. With all 12 existing batteries installed/includedBest for a buyer who wants the complete existing system and plans to evaluate the batteries independently.2. With the batteries removed before shipmentThis can dramatically reduce freight weight and shipping cost.Each BAT-CG12105E weighs approximately 69 lb, so removing twelve batteries eliminates approximately 828 lb from the shipment.Based on the previous approximate 2,200 lb crated shipping weight, removing the batteries could potentially reduce the shipment to roughly 1,370 lb before final crating adjustments.Final weight and freight quote will be confirmed prior to shipment.The purchase price can include the batteries even if the buyer requests that we remove and recycle/dispose of them prior to shipping. Please contact us before purchase if you would like the unit shipped without batteries.This system has some exterior cabinet shipping damage and is unable to be fully tested, so it is being offered for parts, repair, refurbishment, or rebuilding.For a facility already using Myers Illuminator IE equipment, the inverter electronics, cabinet hardware, breakers, controls, wiring, and other assemblies may also have significant value as replacement components.Key FeaturesMyers Power Products / Myers EPSIlluminator IE SeriesModel 6-IE-5-S-BD2012-S-ZIE-1500RPDP configuration5.0 kVA / 5,000 W277 VAC input277 VAC outputSingle phase144 VDC battery system90-minute design runtime12 output circuit breakers20 A output breakersNormally-on outputSummary Fault Form C contactsSeismic mountingIncludes 12 BAT-CG12105E batteriesBatteries can be removed to substantially reduce freight weightExterior cabinet shipping damageUnable to testSold for parts / repair / refurbishment Shipping Returns Policies Shipping Orders ship within 1 business day of payment, subject to freight scheduling. We do not ship to Alaska, Hawaii, territories, or APO/FPO mailboxes unless prior arrangements are made. Any orders shipped via shipping or freight forwarder are final sale with no returns. Freight All freight damage must be noted on the Bill of Lading (BOL) at the time of delivery. Take clear photos of: The damaged item Packaging The BOL damage notation Retain all original packaging until the claim is resolved. Failure to follow these steps may result in denial of any refund related to shipping damage. International buyers are fully responsible for: Customs clearance Duties and taxes Brokerage fees Buyer must arrange for their own customs broker if required. Seller does not provide customs clearance services. All shipments are FOB origin — title and risk transfer to buyer at shipping point. Returns Anacapa Equipment Brokers, Inc. is committed to excellent customer service. Items are sold as-is with a 30-day Right of Return, unless otherwise stated. Only items shown in the listing photos are included. Buyer may return equipment for any reason within 30 days of receipt, provided it is returned in the same condition as shipped. No returns or refunds will be accepted if the buyer uses a shipping or freight forwarder for international shipment. Store Policies All equipment is sold as-is with no warranty of merchantability or fitness for a particular purpose. Buyer assumes all risk regarding the quality, performance, suitability, and safety of the equipment. Equipment should only be installed and operated by qualified personnel. Seller is not liable for any damages, injuries, or losses, incidental or consequential, related to the use of purchased equipment. Buyer agrees to defend, indemnify, and hold harmless Anacapa Equipment Brokers, Inc., its officers, employees, and agents from all claims, damages, or expenses, including legal fees, arising out of the purchase, ownership, or use of equipment.