USED SCOTT TURBON TSM42156

Manufacturer
Scott Equipment Company
Product Overview
The Unused Scott Twin-Shaft Continuous Mixer, Model TSM42156, is a heavy-duty industrial continuous blender engineered for high-capacity mixing of dry bulk solids, powders, granules, and other free-flowing materials. Designed for continuous production environments, this mixer is rated for 5 tons per hour with a 5-minute material retention time, making it ideal for high-volume manufacturing operations requiring consistent product quality.
Built in 2021, the mixer features 42-inch x 156-inch twin mixing shafts housed within a carbon steel mixing chamber. The unit is designed for materials with an approximate bulk density of 33 lbs./cubic foot and operates at a 120 RPM shaft speed. Mixing is driven through a 20 HP shaft-mounted gear reducer powered by a 20 HP, 230/460 Volt, 3 Phase, 60 Hz motor.
The mixer includes a 12" x 24" inlet and 12" x 36" discharge, allowing continuous material flow while maintaining efficient blending performance. Offered in unused condition, this Scott continuous mixer is well suited for chemical, mineral, fertilizer, industrial, environmental, and bulk material processing applications.

Note: This listing includes the continuous mixer as described. Feed systems, discharge conveyors, controls, instrumentation, and ancillary process equipment are included only if specifically stated.

Specifications

Specification
Details

Manufacturer
Scott Equipment Company

Model
TSM42156

Condition
Unused

Build Year
2021

Equipment Type
Twin-Shaft Continuous Mixer

Shaft Dimensions
42" x 156"

Rated Capacity
5 Tons per Hour

Material Design Density
33 lbs./Cubic Foot

Retention Time
Approximately 5 Minutes

Construction
Carbon Steel

Inlet Opening
12" x 24"

Discharge Opening
12" x 36"

Mixing Speed
120 RPM

Gear Reducer
20 HP Shaft-Mounted

Drive Motor
20 HP

Electrical
230/460 Volt, 3 Phase, 60 Hz

Features

Unused condition
Twin-shaft continuous mixing design
Rated for 5 tons per hour
42" x 156" mixing shafts
Designed for 33 lb./cu. ft. bulk density materials
Approximately 5-minute retention time
Heavy-duty carbon steel construction
120 RPM shaft speed
20 HP shaft-mounted gear reducer
20 HP electric drive motor
12" x 24" material inlet
12" x 36" discharge opening
Continuous production capability
Rugged industrial construction
Built in 2021

Applications
The Scott TSM42156 is commonly used for mixing:

Dry powders
Bulk solids
Granular materials
Fertilizers
Minerals
Fly ash
Cement blends
Lime products
Sand blends
Industrial chemicals
Soil amendments
Environmental treatment materials

Common Industries

Chemical manufacturing
Mining and minerals
Cement production
Building materials
Agriculture
Fertilizer production
Environmental processing
Waste treatment
Industrial manufacturing
Bulk material handling
Recycling
Specialty chemicals

Products This Mixer Is Used For

Twin-shaft continuous mixers
Continuous paddle mixers
Industrial continuous blenders
Bulk solids mixers
Powder blending equipment
Dry material mixers
Continuous process mixers
Industrial paddle blenders
Fertilizer mixing equipment
Chemical blending systems
Mineral processing mixers
Continuous batch replacement mixers

Frequently Asked Questions
What is the rated capacity of this mixer?
The Scott TSM42156 is rated for approximately 5 tons per hour, depending on the material and operating conditions.
What material density is the mixer designed for?
The unit is designed for products with an approximate bulk density of 33 pounds per cubic foot.
What are the shaft dimensions?
The mixer features 42-inch by 156-inch twin mixing shafts.
What type of drive system is installed?
The mixer is powered by a 20 HP electric motor driving a 20 HP shaft-mounted gear reducer, with a mixing speed of 120 RPM.
What are the inlet and discharge sizes?
The mixer includes a 12" x 24" inlet and a 12" x 36" discharge for continuous material handling.
Can Aaron Equipment assist with shipping and logistics?
Yes. Aaron Equipment can coordinate rigging, oversized freight, export documentation, and worldwide shipping logistics for continuous mixers, blending systems, and industrial process equipment.