USED 2013 VANTAGE PB-50-5A

2013 Vantage Lathe, Model: PB50-5A Heavy Duty
Big Bore Manual Lathe Loaded with All Options
*Machine Sold New Installed 2013

Main Specifications:
Swing over bed:.................................50"
Swing over cross slide:.....................37"
Center distance from Spindle Nose to Hex Turret vertical surface:........ 152”
Weight capacity between centers:...9,600 Lbs
Headstock Spindle bore:..................9.05"
Spindle speed:...................................0-700 rpm
(4) speed frequency inverter variable
speed, with power air gear ranges.
Spindle nose----------------------------------A2-15
Main motor------------------------------------50 HP

• Headstock oil lubrication with electrical pump
Threads and Feeds (Both Carriages)

First Carriage
Standard with Tool Compound Type
6-way rapid traverse and feeds

Second Carriage
Horizontal Hex Turret with 6-station, Hydraulic, bi-directional
Indexing and clamp with manual selection of stations.
Heavy duty square ways on cross slide
Boring capacity: Maxima 6” boring diameter through Hex Turret
Hex Turret size: 20” side to side, 10” thickness (tall)
Boring bar holder:​2 pieces of 6” diameter
​2 pieces of 4” diameter
​2 pieces of 2” diameter
Hydraulic cable track

Machine Bed Specifications
Width:...............................28"
Height:..............................26”
Machine Weight:.............. 37,900 Lbs.

Standard Accessories:
​Spindle variable speed, 4-range speeds, by inverter frequency control, each range gear changed by power air.

​Hardened and ground bed and cross slide ways, ways lubrication with adjustable timer control pump
​Tool compound post (8” X 8” Indexing every 45 degrees)

Rear spindle adapter plate
Automatic lubrication system with adjustable timer control
Chuck guard at front and rear of spindle
Cross slide constant surface feed on both carriages
Thread chasing dial
Low voltage control
Coolant system on both carriages
One halogen work light on front carriage (No halogen light on rear carriage)
Tool box

Optional Accessories:
1. Full length splash guard (160”) and chip conveyor (160”)
2. One steady rest, capacity from 1” to 14”
3. One steady rest, capacity from 14” to 32”
4. Hydraulic tracer attachment on both carriages
5. Heavy duty coolant pump 280 PSI X 8 Gallon/Min
6. Semi auto-threading in front carriage

Murphy Machinery Office: 262-534-4124 Mobile: 414-520-0843 Website: www.murphymachinery.com Email: [email protected]