USED 2017 HOMAG OPTIMAT KDF 440 C

2017 HOMAG / BRANDT Optimat KDF 440 C edgebander with pre-mill and return located in Florida. Call iBiD Machinery at (678) 925-3556 for current availability, inspection and return-conveyor details.
Homag Optimat KDF 440 C edgebander overview
The KDF 440 C is a production single-sided edgebander commonly fitted with pre-milling and corner-rounding equipment. This listing also includes a return system. However, confirm its exact model and interface.
Model-reference capacities and equipment

Edge-thickness range: about 0.4-8 mm on comparable KDF 440 C setups
Panel-thickness range: about 8-60 mm
Minimum panel length reference: about 160 mm
Minimum panel width reference: about 70 mm
Pre-milling reference: twin about 2.25 kW / 3 hp motors at roughly 12,000 rpm on comparable setups
HIGHFLEX automated positioning packages were available on KDF 440 C machines
Typical equipment packages may include glue application, pressure zone, end trim, top/bottom trim, corner rounding, profile scraping and buffing

Inspection and installed options
First, use the machine serial number to confirm its feed speed and glue-pot system. Then, inspect the finishing units and corner-rounding setup. Also, check the return model, electrical service, air needs and tooling.
*To the best of our knowledge, these model-reference specs reflect maker data and other credible technical sources. However, the actual setup, options, size and capabilities may vary with the year, serial number and installed equipment. Therefore, buyers should confirm all specs and inspect the machine before purchase.